开云体育

Jack, Very interesting. Thanks. Tom, wb6b

So a question. I know some of the power boost suggestions like shorting out parts the were put there to provide stability in the amplifiers or overdriving the audio, do indeed increase power, but at

If you want SWR only I just got a nice cross needle MFJ-822.?? It covers 1.8-200 MHz, 30 or 300 Watts.? On the 30 watt range half scale is about 7 watts. -- Lee - N9LO?"I Void Warranties"

Tom: You can get a marginal speed improvement by moving the data definitions out of the loops. For example: #define ELEMENTS(x)? (sizeof(x) / sizeof(x[0]))? // Gets rid of "magic numbers" in the

> Thank you Nikkos. > Michel F1GTX >

I must have missed something, where's this guide? Roy WA0YMH

Great! -- One

Good idea, getting harder to get good second had test equipment

Jeff, I have the same impression and experience like You! I prodduced a so called level diagramme, see may attachment. Interestingly thsi result was verified on my UBITX: at -107 dBm (=1?V) at the

Hi,Warren, I will always appreciate the data that you generated! Nicer radios, are certainly nicer radios! Some people like Honda FIT , some prefer a high end BMW! For the purposes of coaxing local

Ηi Michel, I already know that the software has some issues, but it's the best option i've found thanks to Rich Neese.You can also find GUI here

I have a current version of the BITX which I just finished assembling in the case.? It works after some debugging....replacing the code in the Arduino due to a cw fault per another discussion.? It

I am finished. This is simply not worth the effort. The difference between this radio and my FT-817 is about $350. The difference between the uBitx and my HobbyPC RS-HFIQ is $100. Both are worth the

Thank you Nikos. I tried 270tft the screen is reversed. 90tft is fine except the S / Meter deviation is reversed. friendships F1GTX Michel

For GUI v3 please try this . ( https://www.mediafire.com/folder/mmu6ua683lk93/Nextion-Screen-1097#g9pqdwt6i6u5s ) https://www.mediafire.com/folder/mmu6ua683lk93/Nextion-Screen-1097#g9pqdwt6i6u5s (

Here is an example of one of the little swr indicators where you just dim the diode https://qrpguys.com/tuning-indicator I’ve used that kind of a circuit as well as the two torrid system others

If you look at the schematic of your tuner, there is probably one or two resistors in a voltage divider chain that you could parallel something with to increase the voltage that gets to the meter.

When I'm googling for something home brewed, I use the term DIY. Such as DIY screwdriver antenna. I get the most hits that way. Vince.

Stay away from their 1/8" phone plugs. I had the tip of one fall off inside a jack. Problem was the jack was on the back of my Kenwood TS430 and I had to pull the back panel to get the jack out to get