开云体育

About 16 years ago I worked on security systems and one of the things we did was replace the standard screen in windows with screen that has a wire spaced a few inches apart to set off the alarm if

Seems like you should have left the 2.2 K resistor. Here is the analysis: 10 watts into 50 ohms requires 22.3 Vrms. You have to diode drops in series, so we could say that you have roughly 20V rms

I see them in Harbor Freight and Home Depot stores. I think they might be 5 or 6 bucks at H .D. Once you get them set they are great. The one in the other picture post can be found on ebay and are

Good grief! What compiler was it? Jack, W8TEE

The String class for an Arduino environment is a crutch and there's no reason to use it. It also can lead to memory fragmentation. The sprintf() function is extremely powerful, but usually is an

The first release will not have the CAT, but we'd guess it will take someone about an afternoon to move the existing CATs code over. There is plenty of free memory and pins to do it. We're just making

I checked eBay and they were about $8 + $5 shipping. Then I checked Harbor Freight and it's $2.50. You have to look hard, but it also has the adjustment mechanism. Jack, W8TEE

I ran across this when looking for an transmit indicator for my Small Wonder Lab PSK31.? The original resistor was 2.2K but our radios put out more than double so I changed the resistor to 5.6K.??

I use these for CAT5 wires for the breadboard, and 30 AWG wire wrapping wire. There is a sliding screw nut that the opposing side hits against to set the depth of cut for repeated stripping of the

Hi, I am running a 3.2e and a 7 inch The code is working fine. I will be releasing the 7 inch .hmi code with enhanced for the larger screen by the end of the week or sooner. Probably on ubitx.net Also

Hi Jack, Patiently waiting for the JACKAL board to be released, have the space, display, teensy, and audio board,? but just wondering if you have included CAT in your new software.? Seems I've

I have one of his cases and I think they are junk! Miss drilled holes, poor layout, way to much paint making for poor ground connections, and a bunch of extra parts and connectors that are not needed.

Andy I was able to observe your uBITX status very easily because of the .btx file (you sent) I made my uBITX the same as your uBITX as shown below. 01. 02.This is the part you set for CWL, CWU

Virtually everything done with the Arduino is C++. Every installable Arduino library is built as a C++ class.? Many of the C++ standard libraries are not included or have been replaced by trimmed

Sorry, Arv and Group. Should have clicked "Reply To Sender" ... mea culpa. 73 Dex, ZL2DEX

Thanks, Mark!? I just tried FB messenger.? I'll give it a few days and see if he responds.? If not, seems like PayPal complaint or credit card dispute are the only options left. 73 Mike KK7ER

Charlie His name is Joe Basque, VE1BWV Here is a youtube link https://www.youtube.com/watch?v=MU4ehLk1I2A <https://www.youtube.com/watch?v=MU4ehLk1I2A&t=28s> &t=28s 73 Art N2AJO Sent: Tuesday, July 3,

Looks easy enough. But, I'm wondering just how good the audio is on the V4 board with the new 3 transistor audio amp. Is it worth having ? So Few new V4 boards out there. I know of one not far from me

I saw a post recently (cant remember where ) of someone who is developing a tft file for a 7In nextion…cant find it now, but the 7 in displays are becoming much cheaper and could be mounted on top

I don't mind waiting? I do mind the uncertainty and complete lack of communication.? 73 Mike KK7ER