开云体育

When tuning in an AM station when your rig is listening on SSB, you will hear a carrier tone... This will vary depending on whether you change your frequency up or down... When you tune so that the

?ordered 10 of one, 15 of the other. gordn ________________________________ Sent: Tuesday, May 29, 2018 4:55 PM To: [email protected] Subject: Re: [BITX20] The new uBITX boards are here ?Well I'll be

Rogier Have you ever tuned across a steady carrier with a CW receiver and listened to the tone as it starts high (difference between the two signals), then goes lower as you get closer to the same

Ok this might be the most newbie queastion in the century but I am not sure what Farhan means in the Tune-Up instructions to calibrate the uBitx to "zero-beat" on a known AM station. Doest this mean

Hi Dana, The customs form is required for the seller only /Kees/. He has to declare the value of goods imported to Canada. 73, Ted VE7VIB

Any thoughts if these mods will hold if we switch irfs to?RD16HHF1?

Thank you all for your replies, I appreciate it very much. Yes, dead-bug-style means keeping short leads and I managed to do that. I started this project November last year and took my time building

Thank you very much Howard & Rowland for speedy reply.?? For R86, do i solder off one end (example below, #2) , lift it up gently?? Solder one side to 33uH/27uH inductor to the R86 removed corner

OK, a few more words about what's going on inside the si5351. Perhaps more than you really want to hear. Assume you are tuned into a CW station at 7.1mhz. We have a? single conversion superhet such

?Well I'll be doggoned --- I found BOTH those transistors at mouser. Tonight I'll order some. This is starting to get INTERESTING. Gordon ________________________________ Sent: Tuesday, May 29, 2018

What did I say about using a high FT transistor? Since I don't have KST10s but know the MPSH10s and you say its the same save for package my first shot would be go for it, can't be worse.? MPSH10s

You said: "It is apparent that you do not feel this is an honest mistake because you have given yourself the boot in the pants to leave," But he said: "I submitted this site for info and help for hams

Like what? Terry - KB8AMZ

Allison, How about using KST10s for Q10/20? Same as the MPSH10, but surface mount. Just a suggestion. Marco - KG5PRT

Just a wild guess.... There is enough pickup die to leads to hear the station at the input of the 45mhz mixer and? its second harmonic 90mhz plus DBMs make very good phase detectors (that means they

Hi need help with the wiring of a bitx40 got to the part where you do the 8 pin on the raddduino board but then it said ti hook up the 5 pin connector?to the board don't bknow if I got the wrong?

Terry, you read things in his post that I certainly didn't. Vince.

Thanks for your response Jerry, but I am still snowballed. Like I took the Extra Class License class the second time around with the same instructor, Jim Wilson, AC8NT. Jim is a scholarly guy with

Thank you Kees.? Envelope arrived in Vermont this afternoon safe and sound. 73 de Vince N1VIN

David Todd, You are way overboard on your decision to leave the group. If that is your decision, then by all means leave. No one in this group told you to leave or asked you to leave. You decided,