开云体育

I guess I would be able to obtain the 1000mi/W award as I had contact with Fiji from the Texas/Mexico border at the Gulf Coast. But as I am fairly new (6 months) still have to learn about those

Hfsignals is set up to autostuff the surface mount parts with hundreds of boards at a shot. Then it's handwork to wind the coils and add the through-hole parts, align and test. To do an accurate job

Something to do on cold winter nights, eh? tim ab0wr "K9HZ" <bill@...> wrote:

My call is fire up on 40 and call CQ!? Someone is likely to answer.? ? If you don't? you never know if the propagation has happend.? I find a lot of South Americans on 10M during the day, but

Have u thought about a magnetic loop? Or an end fed dipole,? I use one but I'm only up about 10 ft. And with my lot I zip zag the wire. Also use a homemade vertical with tapped loading coil on bottom.

You can across the bands but you need a deign impedance of a about 3-5 ohms and enough loading? to keep it down there which means a heavier driver and a different driver output transformer (something

I believe there are some images missing from the document?

Wow 940pf. ?You can design for it to work at 30 MHz but thats not gonna work at 3.5 or 7.0 MHz without switching parts in and out. ? ? *Dr.?* *William J. Schmidt - K9HZ *

I haven't seen a lot of flames here regarding imprecise measurements. If you have the Harbor Freight digital voltmeter (often free with any purchase), you are about as well armed as most folks here in

Allison, I tested at 10 meters and output was a dismal 5.47w.? I also changed the pre-driver to a 2N2219 and paralleled resistor R 88? 22 ohm with a 10 ohm.? There was no difference in performance

BITX QSO Afternoon/Evening, Sunday, May 20, 3PM & 7PM Local Time, 7277 kHz in North America, 7177 kHz elsewhere. Join us as we make contacts from BITX40 to BITX40 on 7.277 MHz in 40 meters! This is a

Roxie, You forgot us who also like to play with the radio hardware.... ;-) The idea of a split is usually bad as the hardware/software do not see the user issues and maybe the user gets to see what

Here is a link to a Raduino replacement at easyeda.com https://easyeda.com/nikpolini/Raduino-1b3e0cb579154514ad2e014b83346b58 You can down load the Gerber files and possibly import to your CAD

I got the bitx40 as an interm radio while by ubitx was still over in India.? Between the two I have made contacts with SSB in 40 US states as well as Ontario. A couple of weeks ago I put in the

Rogier, I just went though that with a box of Arduino Pro Minis I just got. It drove me nuts until I tried programming it using the Demilove, finally the IDE recognized it and the trivial blink the on

Very nice indeed. Thanks for posting. Joel N6ALT

Rogier The Raduino uses an Arduino NANO as the processor. This means that you can use a suitable USB cable and all the Arduino NANO programming tools to write and install firmware to the

Thanks, meantime I figured out that I needed a special USB driver for the Mac in order to connect to the arduino and now its showing.

Mr David Todd, Yes, I agree 100% with you and I can add to that. I operate 80% CW and 20% otherwise.? I do a U turn regarding Bickering.? I enjoy the educational aspect regarding a few Forums here

Ludo It is done. Arv K7HKL _._ wrote: