开云体育

I hadn't thought about that. We do it on 2 meters though ha It's looking like the side of the toroid is grounded together at the bandpass. I'll have to take it out of the case to get a better look. I

I’m using a homebrew mic and a Hendricks mic both wired for, Tip=mic, next ring is PTT, bottom ring is gnd. Joel N6ALT

What sort of mic are you using, Joel?

Dennis, I think this depends on how your mic is wired. This is the way mine is wired. Joel N6ALT

BTW these QRP Labs LPFs are great little filters for $5 ... pretty hard to beat !? Michael VE3WMB

When I ordered my 40 I received no confirmation other than the PayPal processing like you. The radio arrived three weeks later. I was uncharacteristically silently patient because of all the nice

Hi Joe, I don’t usually post much on here but I remember seeing a notice on the main page at hfsigs saying that nothing would ship until after Christmas. When you order it also says that they are

Graham : Your emailed receipt from Paypal is your order confirmation. You will get a subsequent email from Paypal with updated information including a? tracking number from India Post, but only

This should do it:

Does anyone know if there's a site to find the status of an order? I placed an order for a uBITX last week. and, aside from the immediate confirmation that the e-commerce site got my order and charged

I agree with Alan .. if what you want is a CW-only rig then go with the QCX from QRP Labs. This is a fantastic little mono-band rig at an amazing price.? Cheers Michael VE3WMB

Great! If you have two, then you and your daughter can have across-the-house-qso's! If you actually have too LITTLE signal, you can just add a 6" - 12" insulator wire to the center conductor wire

Hi Franz, that's great news! Many thanks for your useful feedback. I will add this as extra information to the modification instructions. 73 Allard PE1NWL

HA. That's the one I'm using.

I'm using the Hendricks digital dial kit that is sold with their BitX20A kit. I take it the only real way to attach it is to stick it to the solder pad of the relevant part on the underside of the

Wow, THANKS, raj for those clues! Your suggestion to start at C3 and work backwards would allow him to further narrow down EXACTLY where the problem(s) are. I still think that raduino is basically

I'm always evaluating new modes for emergency comms for our local ARES group, and one of the ones I want to better understand is ALE (automatic link establishment) --- which might benefit y'all's

I found many boards with C1,2,3 in B40 with bad solder and no continuity. This was in earlier batches. Start at C3 and work back towards C1 for RX. Check for coil continuity and scrape and resolder

Hi Allard, thanks a lot for help !! with10pF in each Input (A1, D3, to ground) Dah was only 1, Dit =7, so I use for D3 20pF capacitor and now I have DIT =7 and DAH =4 and it works :-)) Raduino Diag

Hello All, I'm very seriously considering scratch building a ?Bitx sometime after the holidays as my first homebrew transceiver and I have been reading over the documentation on the website, After