开云体育

I'll try 7.2780

Sure hate I'm missing the roundup tonight. I think I have flashed my radiuno board, as it won't do anything but light up now ( no frequency display) . Guess I'll buy another raduino....see y'all on

E3THR is on that frequency, I worked him! I will listen but not interfere with him.

on 7.277.0 nothing heard almost heard W3TTT ? ?calling now Barefoot ? N8DAH

Thanks!

I will try working 7.2770 here int TN in about 12 minutes. (20W) KI4PSR

I could hear KC8WBK calling CQ. Signal was up & down though. He said he was running 40 watts. Other than that nada! I even tried calling CQ using my new CW capability. Again, nothing heard. -- John -

It’s in the files section of the group 73, Charlie GI4FUE Sent: 10 July 2017 00:03 To: [email protected] Subject: Re: [BITX20] W8TEE B40 Assembly Manual Jack Can you provide a link?

im w3ttt and I hear the 7275 lets go up one to 7278 wrote:

I hear: WQ3TTT KCWBK (??) A lot of bleed over from an alligator on 7275.

Jack Can you provide a link?

WQ3TTT on 7277 wrote:

QSB on both frequencies. 7.220 seems quiet. I'm going to call CQ on that freq a few times. I have logged zero contacts since getting licensed last November... [email protected]> wrote:

Thanks, that link was a great tip!? I was not using the download zip method, rather a copy link method.? After downloading the .zip file, extracting it and then selecting and loading the latest

YEP!

A good how-to for upgrading the Raduino firmware at https://www.dropbox.com/s/s327me4umdckcpc/Raduino_SW_install.pdf?dl=0 ( https://www.dropbox.com/s/s327me4umdckcpc/Raduino_SW_install.pdf?dl=0 )

I am new to the raduino and arduino programming.? I have installed the 1.8.3 version of the ide, and have successfully compiled some of the simple examples on an Arduino Uno that I borrowed from my

Hi Jack I have my board built and running with the latest code, however turning the rotary encoder does not move the frequency from 7.200 (I have tried 3 different encoders with same result).

Joe: I definitely need the feedback, as I tend to look at things from my perspective and it may be totally out of sync with what needs to be done. I will likely implement Fast Tune for my system, but

Both of mine at 10K, but the tuning one is slightly larger. -- Jim/N4AAB