开云体育

Added Art N2AJO Sent from my iPhone

Jerry and all, I've read all the answers that you sent me and others about the power usage for setup. My question is: Farans instruction (part 8 second bullet) say:: * "Switch on the transceiver.

In addition to a function switch, probably want to also remove C91 and C92 as mentioned in Allard's operating instructions.

added Andy

I noticed that to enter my data, my Firefox didn't work, but Chrome worked very well. So if you are having problems entering yourself on the map, try Chrome.

you can find me to

There are at least three ways to flip between LSB and USB operation. Could drive the BFO from CLK0 of the Si5351 as mentioned here by Allard (but not yet implemented in his sketch):

Thanks Raj. You reminded me that I also used to do the same. I also used to wire a small lamp with a 4.5V battery (flat battery pack with 3 cells. who remembers them) and used to read the morse from

Great idea! I'm added. KK6RPX

Hi Colleagues, the best for all. Farham a question for you. What is the best option to change the side band from LSB to USB and vice versa if I want to use my rig in PSK or other mode I need. I

Don't forget that the Teensy also has internal audio processing which makes an ideal candidate to drive the bitx for digital modes as well or even custom audio filtering. I might just replace the nano

Jim, Switch to topic view and make things easier on yourself /g/BITX20/topics ( /g/BITX20/topics ) the map is at

Would someone please provide the link to the map again. Thanks Sent: Saturday, June 10, 2017 10:05 AM To: [email protected] Subject: Re: [BITX20] add yourself to the new BITX operators map A few

A few housekeeping items: I did some more research and you do need a google account to add yourself or edit.? It appears google just assumes the entire world has an account so share with everyone to

Thought I would add the VK3YE AGC. Anyway after several hours of pondering over the strip board built non working AGC, I had a call from Wife... can I take? fresh towels down to the beach for the

I didn't even know peppermint could bark, let alone store it in a can! Jack, W8TEE From: Michael Hagen <motdog@...> To: [email protected] Sent: Saturday, June 10, 2017 9:48 AM Subject: Re:

And in that case the RF can recirculate round and round like a cyclotron! You may get some Gain?

Using the drill press for tapping is an excellent way to go. ?Considering the size of the tap and the type and thickness of material, you should easily be able fully tap the hole by hand. ?Cutting

For your reference, here is the chart showing what size drills to use for various size screws ( http://www.lincolnmachine.com/tap_drill_chart.html ) . I'm not sure of the wisdom of actually using the

I'm not certain that I reversed the polarity - I just assumed that that was the case as I do have a track record, however I thought I had been quite careful. I'll trace the leads through again when I