开云体育

Frank Single cable 73 Art Sent from my iPhone

Hello Using my multimeter I worked out the pins on the stereo sockets I received. Now when I plug in my stereo 3.5mm headphones in, the speaker shuts off. I use a PC headset with mic and phones. Each

Your headset has 1 cable ,but has it also a single plug for both headphones and microphone ......or is the cable partly split with separate plugs for headphones(green) and microphone (pink) ? Frank ,

Disconnect the red wire coming to your Volume pot and connect it to AUDIO IN. Connect a wire from AUDIO OUT to your Volume pot where the red wire was before. -- Ion VA3NOI

Yes, I have the same problem and it was present even before of the last night maintenence. I created a folder but I cannot upload any file there. I was planning to upload some documentation for

Ricardo, To calculate the frequency of a Clapp oscillator you should use the information found here: Clapp Oscillator ( https://en.wikipedia.org/wiki/Clapp_oscillator ) Now, BitX is using a VFO that

Hi I've been reading the group for a while waiting for my BITX40. It has now arrived and i have some complains. Since i can't find any address and all links send us to support here, to who i can talk

Hello everyone,may i ask where to connect the input and output of AGC?thanks in advance, 73` Sent from Yahoo Mail on Android

used 10uf or 25uf ? caps ?25 volt workage ?both work ok

see my posts how i completely removed tunning clicks ? ?KEN

see my posts ?....decouple the lm7805 volt reg with 2x 25mfd caps on the in and out legs. on reg. on the modual ?solved my problem ? ? ? ?KEN ? G8GTI liverpool

solved my tunning click problem ? by decoupling the ?the voltage ?reg ? ( ? LM7805 ) ?on the DDS modual ? used 2 x 25mfd caps on the input and output legs ...completely removed the clicks and

It appears that after the maintenance the files upload permissions have been set back to moderator only.?? Hans? -- Rob G4NQX

Anyone else unable to upload a file ?? The option to upload has vanished so I cannot update the Tips n Mods docs in the files section. I've tried logging out and back in but just the same.? I still

Errrr No.? What's happened ?? I can't upload the files ! I'll attach them here. Rob G4NQX

Updated with a few more tips etc. Rob G4NQX

I never heard of the brand before. This is very new to me even though I've been a ham 25 years and been playing with computers and such for 15 more than that. It looks good and i do know that a finer

Oops! You're right, Raj. The same principles apply...but in reverse. He still has to experiment, as you suggest, and find out what happens. john AD5YE

TNX, Hans. 73 john AD5YE

Hi John, I see here that you are suggesting what is right for a normal designs but this one is opposite 12Mhz - VFO, so you need to make the VFO go lower for the range to go higher. Confused the hell