开云体育

I hate wasting money on a Raspberry Pi that I immediately need to replace. ?With a little extra ram it makes a pretty good dedicated ham radio PC. Also the raspberry Pi 5 is already on the market and

Hi Rick, This sounds like a corrupted sd card. ?Try burning a new card and see if the display returns to normal. ?If this works, you will need to copy the files in the data folder to restore the

Hello to the group -- The yellow spectral display just above the waterfall has disappeared. I think the waterfall is acting a bit strange too, but that might just be noise. I have tried to adjust the

Hello, 1. Check K1 and K3 relays for correct operation. You can press PTT and tap them with couple harder "kicks" from top - example with plastic head of screwdriver. While whistling into mic -

I tried the internal mic and with settings above 50 it tends to oscillate – looks like RF feedback. At 60 it oscillates steady, at 40 it looks better but no idea how it sounds. If I’m ever going

Hi, decided to also add 4x 18650 batteries and their charger because it was purposely bought for the zBitx and will be of no use for me. 73 de CR7BOG.

More and more good development work!

While I was preparing my version 3.052 a thumbs up, my zBITX was sitting here running in receive mode.? ?And stopped to let my dog out. As other have reported, the zBITx gets hot.? I have it

I just downloaded version 3.052 from https://github.com/afarhan/zbitx I have it running in my zBITX Version 3.052 has added Interrupts to the Key Inputs.? ?This version also did what I was avoiding

At the moment, yes, the CW doesn't work properly.? ?However, Jody has now demonstrated yet another way to fix the issue for one version and is working on another.? So the solution(s) are well with

CW with the zBitx continues to be a testament to its false advertising.

Hi all I keep getting reports of quite severe distortion when I use my Zbitx in SSB mode, is it the fact that I'm only using the internal mic, ( reasonable signal reports for a QRP but unintelligible

friends, I am sorry post covid etc, i got focused on other issues.? I am pick up this fix. I ordered the parts for the rf probe and will put that together. Summary of the issue: 1. PTT on SSB results

3861 just switched to "packed, ready to go" status this morning

Quick update, mine actually shipped a few hours ago. Apparently the pace has sped up quite a bit, or there was a bottleneck of some sort. <docvacuumtubes@...> wrote:

Randy -- "de minimus" exclusions apply to most of the world, other than China, and so there really shouldn't be a problem from India. Gordon KX4Z <NumberonePapa@...> wrote:

Hello! My radio, from the April 1 order block, arrived yesterday. Order 3790. There was no issue or mention of tariff encumbrance or interference. It shipped on the 8th. Five days to its new home in

Not wanting to hijack the thread but this seems to be a good forum to ask. Has anybody so far recently had to deal with any of the tariff nonsense shipping to the United States? -- Thank you,

See the manual page 25. "WEB Mode"

Try using the local mdns. http://sbitx.local https://en.wikipedia.org/wiki/Multicast_DNS