开云体育

Interestingly we have to do similarly even with icom7300 with normal USB-digital input sensitivity (about 50 on icom’s scale) I have to teach this to our winter field day team each year Gordon kx4z

The v2 uses IRFZ24N FETs in the output stage, so it is more sensitive to higher voltage. I have the v2 working and I have been using 12.5V from the beginning. I also limit the current consumption,

Howdy, Long shot, probably, but wondering if anyone has a Z- or SBitX that is either online or can be put online at some prearranged time? Essentially, I’d really like to see how usable the web

A 2S lipofe4 pack should do it for the field. [email protected]> wrote:

The sBitx website has a document that describes how HFSignals calibrates/tests the sBitx radios before shipment. The very first line reads: " The power supply should be on 13.8 " I assume that you

Doug, im not positive but I believe for the Sbitx v2 and v3 they recommend 12.5 volts input, but I’m not positive. I hope I’m correct, I hope this helps. 73, Robert, AG6LK

Yes on fldigi psk31 I have to turn the audio drive/attenuator from -3.0 to -28.0 on most modes. ?Look at the bottm right of your fldigi screen ryan kk6dzb

Thankfully.

I recently tried my hand at PSK31 on my new sBitx v3 with 64 bit software. Keep in mind, anything having to do with the digital modes is *very* new to me. I received an email from someone who

DROK Buck Converter 12v to 5v, Voltage Regulator Board DC 6.5-36V 24v Step Down to DC 1.2V-32V 12 v Volt Transformer Reducer 4.5A 75W CC CV Power Supply Module [email protected]> wrote:

I have bought several dork supplies good for 5 to 30vdc 10 amp... from amazon [email protected]> wrote:

I just ordered one.? It's about time I got a decent bench supply. Gerry

Or this as a simpler but much less versatile option: https://www.digikey.ca/en/products/detail/mean-well-usa-inc/GST36U09-P1J/7703697 That’s the Canadian Digikey site. Here’s the US

Anyone have a Sbitx DE non working that they would like to get rid of. I am in search of the main board. 73 Art

What size is that?

As noted on zBitx page at hfsignals, a barrel connector, and one is included with the radio. Assume it is same size as the power connector for sBitx ken, N2VIP

What style power supply connector is used? Ron

https://a.co/d/cQmErlL I would guess something like this would work well. David [email protected]> wrote:

I'm looking forward to this little radio! I'll probably end up using it mostly on battery power, but does anyone have any recommendations for a low RFI, small, 9 volt power supply capable of running

Thank you, Evan. The problem I had with getting the sBitx software to work with ION2.G (the ALE software that U.S. Federal SHARES wishes to use) is that their CAT controller expects the radio to