开云体育

Thanks, but I was thinking of being out in a park or a campsite without a Wi-Fi network. My laptop connects to my uBitx for rig control with a usb cable. I was wondering whether I could do the same

I haven’t updated the software yet, but I wonder if something like rigctld could provide a network based CAT interface, and ALSA could expose an RX/TX network audio stream. 73, Jeremy / N0AW

You can remote into sbitx 1. Connect the sbitx to a wifi network. 2. From your laptop, open http://sbitx.local - f

Hi Jonas, I had the same problem after changing the locale. Everything started to work with locale set on US (United States). Hope this helps! Best Lorenzo IU5RDU

Hi Dirk Surely they must have sold plenty of kits, so there must be some out there. Mine was already populated with the Tx filters, relays etc. I had to build the Rx side, synthesizer and frequency

Happy to be corrected, but I think the easiest way would be to run WSJT-X on the sbitx pi and VNC in from your laptop. I run that way at home and it works very reliably.

Thanks, that sounds like a good product. However I was hoping to use my laptop as well, say, on a picnic table, connecting to the internet through my cell phone. Doing too many things can overload the

how about a portable 1080p monitor? like: THIS (

I know this question has probably already been answered but I can’t find the right thread. I want to use my laptop and rig control to my sbitx so that I can use WSJT-X portably. The 7 inch display

I have a 40 m Digitrex. Would love to get a copy of the manual. Not sure what mic to use with it. Can't believe someone else has one of these! No info online at all! 73 KG8JK

According to sbitx screen v3.02. Is this what you were asking?

Hi Gordon, I agree with that point too regarding the failure. I haven't extensively explored the hardware aspects of this radio yet other than the failed diode issue. After viewing one of your YouTube

After a PA failure and a possible mishap when probing voltages as I was replacing the finals, My Bitx V2 will no longer receive from cold. That is to say, when I turn it on and start the application,

Ha!!! I just wanted to point out that he definitely DOES have output power! Something baaad has happened. I don't know what. Gordon

Hi Gordon, I am happy to step aside and let you diagnose the issue. -JJ

/g/BITX20/message/108841

I think you guys might’ve missed this paragraph from his documentation “External wattmeter also shows constant transmit in ssb with no modulation. In cw mode, using a keyboard, power does not

Hi All, I have discovered a strange issues with my V3. RX works fine, but there is no output when trying to send. Regardless of mode. Tried SSB, CW, TwoTone. Updated from Github to latest SW. I did

I apologize.. Had a work issue to be addressed at the same time of my last post.. The issue is that the power out indicator is not reflecting the drive control setting.. It could be a software issue

> > > > > > Hi Scotty, I noticed that the mic level is set at 0 in your video. That could be the cause of "no modulation". Adjust it to about 24 and see if that helps. You may need to increase it as