开云体育

For the boards that do not have EEPROM will you provide the use of an external EEPROM?

Hi Art, As Rafael said, pin 16 of the connector between the Raduino and the Mainboard is the 12 volts supply to the Raduino when looking at the raduino_tft.pdf schematic. If you mean pin 16 of the

Hi Ashhar, I can help investigate! I'll start to play with the sBitx code. I'll first remove all the UI code to make it easier for me to play with, keeping it as a daemon, for access by client

Rafael It didnt work! I didn't investigate more. I will get back later. - f

Dear Ashhar and all, I was think on why the Raspberry Pi OS in the sBitx is not 64 bits. Is there any reason? At least for media intensive tasks (like FreeDV), software can benefit from using the

Pin 16 of the Raduino connector to the radio is 12V: Cheers, Rafael

the came to the wrong address

reply to incorrect sender

There are three connectors on the Radiuno. Which connector are we talking about? You could just touch a VOM probe and find it out. - f

hI ALL, Can anyone tell me what pin 16 state on the raduino is on receive and also on tx ?? voltage high or low in each case ?? Art G3XNE

yea driver is fine cant flash with a UNO or TinyUSB IDE appears to be a bp board of clone, I can use a official nano and flash code fine. so this is a janky nano provided in the kit won't boatload or

Hi Vic, in menu_main.cpp you have a hard coded 50 that is a multiplier to the knob value. I think this is what you are looking to change.? "Normal operation tuning frequency step size" Rgds, Gary

Vic: This is a crap shot, as I don't know the V6 ?BitX code, but around line 212 in setup is: const SettingScreen_t ssLocalOsc PROGMEM = { ? SS_LOCAL_OSC_T, ? SS_LOCAL_OSC_A, ? 1, ? 50, ?

Same question: did you install the CH340 device driver?? Jack, W8TEE

Any chance the CH340 device driver's not installed? Jack, W8TEE

Kelly, Did you try to upload the software using both the "old bootloader" and "new bootloader".? Under V2.0 IDE, its Tools->Processor Atmega3288P Try both.? When Bootloader doesn't load, it is

on closer inspection it appears my device was shipped with a faulty nano clone of some sort so .. I cant even load a boot loader and other signs its a knock off. seeing as how you pay for this

Agc on Ubit v6 should be included as standard Bruno Lw3DTR -- Bruno G.Luci

Kelly, Yup, some magic knowledge here that is hidden within this list.? I always search this list before posting and I *still* miss things. That is one of the benefits of having folks like Evan on

After trying 3 different software versions on my V6 uBitX I have been using Reed's R1.5.1 sketch the most as I like the way it handles while being easy to read. However, I would like to change the