Re: uBitx v1 kit for sale
Ubitx V1 ......is it?
By
Praba Karan
·
#87910
·
|
Re: uBITX V6 LIMITING POWER OUTPUT
Hi Muthu, For issue #2, the thread to read is /g/BITX20/message/55362 Diode isolation of those big 47uF caps?for Audio circuits from the 'RF' circuits. (which I only recalled after a
By
Gary Anderson
·
#87909
·
|
Re: radio will transmit CW but not voice
Andrew, In the video: https://www.youtube.com/watch?v=t6LGXhS4_O8 Go to the 10minute mark for the third step in the full calibration process (though if you did the prior steps then the frequency
By
Evan Hand
·
#87908
·
|
Re: uBitx v1 kit for sale
Just FYI it's been sold. Thanks, Jeff KE8BLW
By
Jeff Gazdacko
·
#87907
·
|
Re: radio will transmit CW but not voice
I bought a cheap baofeng microphone thinking that the pinout for it was correct to accommodate the wiring on the radio. Now I have no idea if that is the case or not. I bought a 4 pin microphone and
By
bigdaddy@...
·
#87906
·
|
uBitx v1 kit for sale
(admins please let me know if this isn't allowed) I have a uBitx v1 kit that I bought a few years ago for ~$100, I haven't had a chance to work on it so I'm putting it up for sale, $70 + $15 USPS
By
Jeff Gazdacko
·
#87905
·
|
Re: radio will transmit CW but not voice
There are several on this group that might be interested in helping to get your uBITX V-6 work on SSB as well as CW. Given the thousands of uBITX that are in regular use, it cannot be all that
By
Arv Evans
·
#87904
·
|
Re: radio will transmit CW but not voice
Yes, I do, but I live in Brazil. you will charge how much Em dom., 25 de abr. de 2021 ¨¤s 19:05, <theaddies@...> escreveu: -- *Atenciosamente. Carlos Fraga*
By
Carlos
·
#87903
·
|
Re: radio will transmit CW but not voice
Does anyone want my ubitxv6?? I am done.
By
bigdaddy@...
·
#87902
·
|
Re: radio will transmit CW but not voice
Those spaces were designed to permit adding a cw filter in parallel. Curt
By
Curt
·
#87901
·
|
Re: radio will transmit CW but not voice
Are the parts in the circle missing or should they not be there?
By
bigdaddy@...
·
#87900
·
|
Re: Cw Finals seem very warm and power output lower
Ahh yes, the ole just because others have done it, it must always be correct. Because people have always used parts outside their design specifications we will have to do that in all eternity.? The
By
John Cunliffe W7ZQ <n2nep@...>
·
#87899
·
|
Re: Firmware questions
None of TSW offerings support the Nextion.? All info is at http://www.w0eb.com Ron
By
W2CTX
·
#87898
·
|
Re: Firmware questions
Jim, I¡¯d be interested in purchasing the Teensy 4.1 adapter kit from you. I have the uBITX v6 so it sounds like there wouldn¡¯t be any problem with the conversion. I have the Nextion 5¡± Enhanced
By
Robert AG6LK
·
#87897
·
|
Re: VK4PP Ultimate uBitx Daughter Board.
#ubitx
#filters
#parts
Someone stumbled into an old thread. I am thinking this multifunction board wasn't developed, it was a collection of ubitx add on. Not sure it cured v3 v4 spurious (-:? it even was going to host my
By
Curt
·
#87896
·
|
Re: Cw Finals seem very warm and power output lower
I imagine there are numerous ubitx with fans pictured on the web - so go on a tour!? Thermal science of transistors is a bit abstract even working with PhDs I work with - so stay with your conviction
By
Curt
·
#87895
·
|
Re: VK4PP Ultimate uBitx Daughter Board.
#ubitx
#filters
#parts
What board is this? Gerry. VE4GKS Sent by the Thunderbird
By
Gerald Sherman
·
#87894
·
|
Re: VK4PP Ultimate uBitx Daughter Board.
#ubitx
#filters
#parts
Another 2 here please Thank You Laurence KB1HKO wrote:
By
Laurence Oberman <oberman.l@...>
·
#87893
·
|
Re: VK4PP Ultimate uBitx Daughter Board.
#ubitx
#filters
#parts
2 board here as well, Thank you.
By
John Cunliffe W7ZQ <n2nep@...>
·
#87892
·
|
Re: Cw Finals seem very warm and power output lower
A one inch fan moves enough air over those heat sinks, anything bigger is a waste as the air just bypasses the sinks.At work, we cool a lot more than those puny heat sinks with one 1 inch fan . There
By
John Cunliffe W7ZQ <n2nep@...>
·
#87891
·
|