开云体育

Has anybody tried dropping in a Teensy? - Jerry KF6VB

Thanks Jack, I suppose I should have been more specific - a more powerful board that would fit in the same form factor and at least more or less plug in. Although amazing things can be done with

Do you guys really have to get so bitchy about such a trivial matter ??? You seem to forget this is NOT just an American oriented group there are many others from outside the States who have no clue

My feeling is if the specials can be used with the BITX20 one should be able to post them. I subscribe to Electronic Goldmine as well as MPJA . They have daily specials which one may miss if you

Too late Max, Having ordered from them I am already signed up. Wanna hear about other places I am signed up or don't you experiment? Just use the ignore thing. If you learn how to make filters you can

Have you checked the SWR on the CW portion of the band? If it's higher than in the SSB portion then that might explain it. I was measuring the current on my uBITX and noticed it drew aprox ~200ma more

Since you like them so much why don't you sign up for them yourself? Max KG4PID

Hi, We don't even have to bother about configuring a filter. Right click on the message and then choose to *IGNORE* the entire thread - that includes all of the messages past, present, and future in

If they say MPJA in the subject line with no RE: in front, they need to hit DELETE or buy a new keyboard, if not willing to admit they are not computer-savvy. It's like some who see all upper case and

I enjoy those links, keep them coming. If some people don't know how to set up filters in their e-mail that should not keep you from posting them.

Jerry: Almost any other microcontroller will have more of everything: flash, SRAM, and clock. This is true for the STM32, ESP32, and Teensy. All are programmable in the Arduino IDE after installing

Hello! I downloaded the ubitx source code off github, and successfully compiled and uploaded it to the radio. As a "Hello World" experiment, I changed "LSB" to "PSB" on the display. Then changed it

I always start by testing the CW output to verify that the power amp is working.? If no power on CW then most likely it is a Q90 failure.? To test Q90 measure the voltages on each of the three

Been working some CW and V6 seems to be running a lot warmer than it did on SSB and I ran FT8 but didn't notice the cas getting as warm as it was now. could the finals be going. What check looked at

First of all thank you for answering my question, I am not getting power output, the mosfet transistors are in good condition. That's why I was asking about the test points. Thanks again!!!

Dear All, Good Day.I am using uBITX V6 for 11 months and I am getting good reports. Now I want to add a linear amplifier so that I can work more distant stations. For using the linear, I have to limit

Yes, the firmware replaces the one shipped (and indeed, my fork is derived from original firmware Farhan's code). Basically a rip-off, leaving just the revised CAT and si5351 functions. Rafael

Mike, Thanks for the confirmation.? I just picked up a set.? I've been meaning to do this for a while. -- 73, Brian - N8BDB

My question is : does the firmware you are elaborating can totally replace the original firmware loaded in uBitx as they are sold by HFSignals? 73 - Pierre - FK8IH

Yes they are. Mike K5ESS Sent: Thursday, April 22, 2021 4:47 PM To: [email protected] Subject: Re: [BITX20] MPJA Specials Related to this, it looks like mpja has the axicom D2n relays at a good price.