开云体育

I enjoy those links, keep them coming. If some people don't know how to set up filters in their e-mail that should not keep you from posting them.

Jerry: Almost any other microcontroller will have more of everything: flash, SRAM, and clock. This is true for the STM32, ESP32, and Teensy. All are programmable in the Arduino IDE after installing

Hello! I downloaded the ubitx source code off github, and successfully compiled and uploaded it to the radio. As a "Hello World" experiment, I changed "LSB" to "PSB" on the display. Then changed it

I always start by testing the CW output to verify that the power amp is working.? If no power on CW then most likely it is a Q90 failure.? To test Q90 measure the voltages on each of the three

Been working some CW and V6 seems to be running a lot warmer than it did on SSB and I ran FT8 but didn't notice the cas getting as warm as it was now. could the finals be going. What check looked at

First of all thank you for answering my question, I am not getting power output, the mosfet transistors are in good condition. That's why I was asking about the test points. Thanks again!!!

Dear All, Good Day.I am using uBITX V6 for 11 months and I am getting good reports. Now I want to add a linear amplifier so that I can work more distant stations. For using the linear, I have to limit

Yes, the firmware replaces the one shipped (and indeed, my fork is derived from original firmware Farhan's code). Basically a rip-off, leaving just the revised CAT and si5351 functions. Rafael

Mike, Thanks for the confirmation.? I just picked up a set.? I've been meaning to do this for a while. -- 73, Brian - N8BDB

My question is : does the firmware you are elaborating can totally replace the original firmware loaded in uBitx as they are sold by HFSignals? 73 - Pierre - FK8IH

Yes they are. Mike K5ESS Sent: Thursday, April 22, 2021 4:47 PM To: [email protected] Subject: Re: [BITX20] MPJA Specials Related to this, it looks like mpja has the axicom D2n relays at a good price.

I don't really understand your question, Pierre. Rafael

Robert Look again you are on bitx list, all manufacturers tend to be welcome here if it relates to ubitx etc. Let's NOT jump to conclusion that he needs a baby filter, he would be hearing AM

Is your project a standalone firmware or does it come in complement to the basic uBitx firmware? 73 - Pierre - FK8IH

The v5 and v6 are almost identical.? The only differences are board layout and the controls and jacks were moved to the mainboard to make for a solderless kit build.? You can use the v6 data for any

Related to this, it looks like mpja has the axicom D2n relays at a good price.? Are these the ones to use to replace the relays in the ubitx based on this post?

Is the test point data for UbitX Version 5 available?

Max, I'm gonna make you a happy camper. Bob — KK5R

I'm enjoying doing all from the computer, especially the calibration procedure! Btw, is the first IF frequency also a good variable to be accessible through serial command? Rafael

I have found some interesting items to incorporate into my uBITX builds.? I am building my own version of a Raduino that will incorporate a 100 PPR (Pulse Per Revolution) encoder that I purchased