开云体育

And here is the pic:

I did this mod to my V6 and with the Nextion display my current draw dropped from 350ma to 250ma (TFT draws 100ma more!) also I wired a on off switch so I could remove 5v from the display. With the

Hi Smitty. Just tried your version, much nicer to tune. Philip G7JUR

Thanks for explaining your changes Mark, it makes sense now and explains why the display flashes every time the digits change also. All in all, it's working pretty good now. Joel N6ALT

I'm not entirely sure which you meant, so let me answer the question you MIGHT have been asking in case others are similarly confused. :-) Does it work with the existing encoder wheel hardware??

Forget that last question, I loaded up Marks's code and the encoder works great. Thanks to those who know how to code we are getting closer everyday to a usable V6 UBITX. Joel N6ALT

So Mark, just to be clear, this code will work with the existing stock encoder also? Joel N6ALT

Here's my fork of your code with my changes applied: https://github.com/SmittyHalibut/ubitxv6/tree/pdq_gfx_update In whole, the goal was to improve the responsiveness of the UI, and I think the

Hi Mike, I am building now a SWR Bridge from Kits and Parts to display the output power on LCD and I have the same issue, on RX voltage on A7 is indicated on my 16x2 as expected, on TX there is no

Is anyone using the Nextion meter for relative power and not just S-meter function? ?I’m not seeing a place in the code to disable it during transmit, but even with voltage on A7 not getting any

See my latest post... Jack, W8TEE

Also, if it's a clone, make sure you have the CH340 driver installed. If not, search "CH340 Device Driver Download" and download/install. Jack, W8TEE

I think I see a problem...perhaps not THE problem, but a problem. EVERYONE: ??? Whatever is the project's INO primary file name (e.g., ubitx_v6.3_code.ino),??? which is the file that contains

I don't understand. What is the Raspberry Pi for?? Also, what is "Arduino 2.1.0.5+dfsg2-4.1". If you are compiling on a Mac, what is the emulator program? Jack, W8TEE

Bob, That log also shows a successful compile, but unsuccessful upload to the nano. Try changing the serial port the IDE is using. Reed

here's the errors on the mac using v 1.8.10 -- Bob NZ2Z

Bob, I don't see a complier error for you either. However, yours does show a failure to upload the program to the nano: Is there another serial port you can try? Reed

Hello, BITX was release initially for experiment and education and currently you can find find a lot of information which are common to all BITX and currently provide a huge amount of information.

Ted, Thanks for that. Lots of experimental fiddly tuning with that, but with some effort, maybe will pay off. I notice that it didn't appear that he was able to get any useful WSPR results on 20M and

Here is the compile from the Mac -- Bob NZ2Z