开云体育

Can someone Please tell me where the TX-RX on the LED hooks up on the uBITX Board?Thanks Jim Baird W5OMMHOT IN TEXAS

Thanks to Paula and MVS Sarma for your replies!? I really appreciate your help.? I will proceed and assemble my radio using your wise information and recommendations. 73, Martin

There may be a miss-understanding? I used standard Raduino LCD connections (parallel) on RaduinoUMax. The Microchip part provides 16 I/O bits for options.?? I used this part because the library

I fear using serial lcd communication could cause more noise for the receiver. [email protected]> wrote:

I have a UBit replacement Raduino, many of the group bought them. It is much improved and is a direct replacement.? It has 16 Additional I/O bits using a Microchip Expander.? Ada Fruit library works

Don't forget to also look at W0WEB's board offerings. The BITeensio and a nano replacement: http://www.w0eb.com/Page2.html It may not meet your 'less is more' criteria, but? still worth a look... to

No problems Razvan, glad the information may be useful. Ask if you need any clarifications. 73, John

Thank you for the replies. I've looked at the CEC and JackAl expansions, they are nice but add unnecessary complexity for this specific purpose and neither seems to have all these minor but specific

Do you think it's a good idea to put the S1 switch (the volume switch on GND instead of 12V ? This way, it'll cut everything when powered off. Thanks, -- 73's Adrien F4IJA https://www.qrz.com/db/F4IJA

Re how to get the RG-174 cable to connect gracefully with the SO-239 and the little Molex/Relimate plug for antenna on the uBITX board: Strip outer coating of RG-174 about an inch (2-3cm to strip for

This shd be interesting.

What would it take to make it worth while for you? Preston G. Preston Parker CPA AZ CPA Pro PC 5704 E Aire Libre Ave Unit 1025 Scottsdale, AZ 85254 preston.azcpapro@... 480 499-5427 866 459-5242

Hello Razvan, I had the same objective of creating a portable rig. The easiest and cheapest option I found was to add a second Arduino (a Mini in my case but can be a Nano, the sketch is the same).

I built one of these. Used Nextion 3.5 inch touch screen. [Image] Get Outlook for Android<https://aka.ms/ghei36> ________________________________ Sent: Wednesday, September 11, 2019 4:41:31 PM To:

That did remind me of another possibility. Look up the JackAl board. It is a replacement for the Raduino with a higher power processor and I believe more IO. Search the the web for it. Evan AC9TU

Would you be interested in building the uBITX 80-10 Meter QRP transceiver kit including the InKits universal case featured in the September QST magazine?

Ashhar, I believe that Razvan is looking for a Summits On The Air capable rig with battery and SWR monitor. The Antuino would be a great portable instrument to measure the antenna, but not too good as

That is what the Antuino is.

The short answer is yes, I have read post on members implementing what you are planning. I do not have the threads saved, however a search by topic might get the for you. In the meantime, check out

Yes. It is normal. Mixer input winding is brought thro rx low pass filter to ANT pins in Rx mode. and PA OUT at the secondary is brought thro low pass filter concerned in case of Tx . You may connect