开云体育

Godz wotta pikki system! Won't even look at anything with non-alphanumeric name!? Anything with "_" is ignored. The IDE recognizes the raduino when it's plugged in - and that powers it up. I not

Hi Dexter, I have some questions regarding your setup. Maybe they are stupid and you already have done all these things, but the thread doesn't tell me what ?previously was done and what exactly was

As other have said it seems the BFO. You probably need to shift by at least 500hz. This picture is very similar to the one I showed to a professional vendor when I bought from them a 'fully aligned'

I slapped one together on the bench and used 69mhz filters salvaged out of a really dead TS830 instead of the crystals for the filters.? Tweaked the code and works well. Currently I'm experimenting

Search "Ted" in topics. Files are in the thread...enhanced is included.

Hi, This may be the Video Curt is referring to: https://www.youtube.com/watch?v=8S3RGpRGn-w Ashhar's interesting segment starts at the 57 minute point, sandwiched between someone drinking beer and

Daniel YO8UFO op Likewise I am thinking it could be your BFO setting - mine was way off when first delivered.? If you listen carefully to SSB you might come to same conclusion that it may need an

Thanks Robert! Removing the AGC confirms it was not installed correctly. Going to reinstall the AGC in a couple days after I add header pins to the main board to allow for a more stable and secure

A note to the VU hams. Where are you? I've worked Outer Mongolia & China but can't find a VU on CW or FT8. Most likely it will take an amplified version of the ubitx. 73, -- Bo W4GHV - since '54

Hi Dexter. Bob is correct about in loops in general. However, I suspect this error is about the missing "loop" function common to Arduino sketches. (Every Arduino is expected to have "setup" and

Dex Just to keep you from being led off in the wrong direction....... The JRE is compiled from the development files. The software management program is Synaptic...not Symantic. Some Linux

Fantastic!? It's a great feeling to find and fix a vexing problem like that! I will try again to attend field day this year... see how it goes.? I'll keep my ears open.? (I'm also going to try to

As far as using sudo to update and upgrade, that's fine... SOP with Linux (at least Ubuntu, which I use).? If your getting the software didn't pop up any error messages, that too should be OK. There

First off, I do not have an Antuino (yet, waiting for availability after June 1), however have done some research into barrel connectors and I am pretty sure there is an error in the schematics

Part of the library glcd? Rob PA0RBL

Ho Ashhar Same question from me and I got also problems with the line containing fonts/allFonts. Perhaps part of the same. Rob PA0RBL

Dale — when I was looking for the same files, it became clear that there is no one source. Folks take some code base and adjust, tweak, etc. then ?“publish” somewhere. So it comes down to

Armin & Raj thanks for checking in !? yes credit W7ZOI and others for that nice tool from Elecraft - that is exactly Wes's circuit.? it should provide good power measurements, so like you I am

Farhan has a very nice video somewhere on the web describing it in great detail - it is more than an antenna analyzer.? It was within an interview type ham radio podcast - I enjoyed it greatly! It

Hey guys it's Kelly. Took a week off to do some things regarding some python programming, and decided to finally tackle the issue with the receiver not hearing anything. First thing I did was to