开云体育

I apologize if this is a bit morbid, but the mother of all estate sales on Ebay looms in the future. Mike K5ESS Sent: Friday, December 28, 2018 9:22 PM To: [email protected] Subject: Re: [BITX20]

the challenge would be to eliminate the if image. this could be done when you sweep to both sides and eliminate the image reading in software. here is an example : 1. lets imagine that there is a

Bob: That's not my shack. It belongs to George Ulm, W9EVT. Everyone I show the picture to says it's a remarkable collection. No, what's remarkable is his wife and that he's still married! Jack, W8TEE

But wait...? There's more! ? ??https://www.qrz.com/db/W9EVT He's an equal opportunity collector. I saw my long lost piece-o-crap Hallicrafters S120 in there, about 10 down from Jack's photo, top

I ship all over the world and have not had any issues [email protected]> wrote:

RE: This is too many radios... Inline image Jack W8TEE Now, that is worthy of a feature article in QST. I have to wonder how you find the time to spread around the operating table/s for keeping those

The radio has been SOLD! Thanks, Jim

The audio chain is just the mike pre-amp at Q12. A good start would be to check for the DC voltages that Randy gave us. Key the mike, but no need for audio into the mike. Next step is to do Allard's

It already is a simple SA. Just shut down CLK1 coming out of the SI5351. Includes a tracking generator at CLK0/P4. Jerry, KE7ER

That list of part numbers is all surface mount, appropriate for? the board design that Kees did. My way of encouraging somebody else to take up producing the kits. Here's the two threads relating to

This could easily be turned into a simple SA. I’ll bet Kees already has the boards mocked up… Sent: Thursday, December 27, 2018 10:28 PM To: [email protected] Subject: [BITX20] Antuino - the

Farhan Very good RF analyzer design and build. Is that going to become a BITX-Labs product at some future time? Happy New Year! Arv K7HKL _._

Any thoughts about a uBITX cw freq? 077 would seem a bad bet but it would be nice if we had a cw watering hole in addition to 177/277. Hope to catch some of you on. Scott Ka9p

Which is to say the old mike failed then you put a new one in with wrong polarity ??? Timothy E. Fidler : Engineer BE Mech(1) Auckland , NDT specialist AINDT UT /RT3 , MT2 CB #2885,? Telephone

Hooray? !!!? Thank you all for the assistance. The root cause was connecting the mic with the wrong polarity. A new mic and correct polarity connection and I am sorted. I have learned a valuable

Jerry, Despite the data sheet implying that pins 1,4,and 5 are tied together internally only pins 1 and 5 are tied together. I just examined one to confirm this. Mike K5ESS Sent: Thursday, December

Jerry, thanks for the tips. I was able to adjust RV1 and see 100mA with the key down and no audio input. However, I do not see the 1A current when shouting/whistling into the mic. My "power meter" is

Who is that? Is that you Jack?

I have too many radios! Naw. This is too many radios... Jack W8TEE

Hi Mike, Thanks for the reminder. I will try to get some operating time in for that. Most of my time will be taken by another long, old tradition - taking my lady out to a new years eve supper, party,