开云体育

Hi all, Can anyone tell me how to obtain a replacement raduino board for my BitX40? 73 John M0JBA

Warren, Please share your spurs at 3.6, 7.2 and 14.2 with the same 100Mhz span. Want to compare with mine. Raj

Allison, I would be interested in further info on your checks with the Buffer. Did you buffer all three outputs in your test?? And measure the buffered one only or all three? I don't have access to

Please post a picture of it, we’d love to see it. Joe kd2nfc

Well that is unfortunate. I am sure they will show up eventually but “eventually” can be a pretty big window of time. Ripley KD8UYQ Sent from Mail for Windows 10 Sent: Monday, September 10, 2018

Hello Nick, Well they look dandy to me. Please let me (us) know when you start producing them. In the meanwhile I ordered on of Glen’s boards to start playing with. Ripley Sent from Mail for Windows

Well, we have an unexpected setback. The powers that be in my neighborhood concluded that our mailboxes were not uniform enough, so they spent our money and pulled up all of our existing mailboxes and

Thanks Ripley. I havenet made any yet, just waiting on the final verdict as to whether it is good or not... more pics. Idea is to drill a GND hole just above the R27 printing. then the board sits

https://groupsio.zendesk.com/hc/en-us/articles/202739265-Hashtags https://groupsio.zendesk.com/hc/en-us/articles/201892579-Integrations _._

Hi Vince, I bet with the key up is still goes to zero accurately. SWR is a RATIO so about half of whatever maximum deflection shows is still 3:1. And less is still less. 73, Bill KU8H

Hello Glen, I was addressing Nick but I’d happy to have one of your boards in which to experiment. If you would like, send me your PayPal account address via my bob.ripley@... email

Ripley, not sure who you addressed the post to, but I have 3 x hand made pcb's available for postage cost only. ($4.00 sent as paypal gift) I added the coupling cap, they are drilled and clear coated.

Was that directed to me? Without a quote it's hard to tell. Vince - K8ZW. -- Michigan VHF Corp. http://www.nobucks.net/ http://www.CDupe.com/ http://www.metalworkingfun.com

Hi Raymond, The best starting point probably would be to check the voltage on pin 2 (Blue wire) from the Raduino board to the key jack and make sure it goes to 5V when the key is open, to 0V when the

I also have an unbuilt V3 uBitX kit for sale. I have too many projects going on so I've decided to pass it along. It's still in the original bubble wrap in the original plastic box except that I did

Hi Tom.........The only res. fitted is the 4K7 pull up, 5V to the key jack....I'm baffled 73 ________________________________ Sent: Monday, September 10, 2018 3:16:08 PM To: [email protected] Subject:

fascinating. Never saw that FIREBIRD brand swr meter before, but sure enough, you can find it on facebook and yes, they are apparently meant for far more power than a CB radio can produce. Allison

Right, well this firebird isn't even usable as an swr meter unless you put about a kilowatt into it. In the FWD, the meter won't go full scale below about 14 MHz. Vince.

Hi, gone with the go— Almost anything works receiving. More power to you for learning how to get a transmitting antenna going As you gain skills, you’ll eventually want to deal with the harmonics

Hi Tom, Building one is so easy that even *I* can do it. 73, Bill KU8H