开云体育

> Thank you Nikkos. > Michel F1GTX >

I must have missed something, where's this guide? Roy WA0YMH

Great! -- One

Good idea, getting harder to get good second had test equipment

Jeff, I have the same impression and experience like You! I prodduced a so called level diagramme, see may attachment. Interestingly thsi result was verified on my UBITX: at -107 dBm (=1?V) at the

Hi,Warren, I will always appreciate the data that you generated! Nicer radios, are certainly nicer radios! Some people like Honda FIT , some prefer a high end BMW! For the purposes of coaxing local

Ηi Michel, I already know that the software has some issues, but it's the best option i've found thanks to Rich Neese.You can also find GUI here

I have a current version of the BITX which I just finished assembling in the case.? It works after some debugging....replacing the code in the Arduino due to a cw fault per another discussion.? It

I am finished. This is simply not worth the effort. The difference between this radio and my FT-817 is about $350. The difference between the uBitx and my HobbyPC RS-HFIQ is $100. Both are worth the

Thank you Nikos. I tried 270tft the screen is reversed. 90tft is fine except the S / Meter deviation is reversed. friendships F1GTX Michel

For GUI v3 please try this . ( https://www.mediafire.com/folder/mmu6ua683lk93/Nextion-Screen-1097#g9pqdwt6i6u5s ) https://www.mediafire.com/folder/mmu6ua683lk93/Nextion-Screen-1097#g9pqdwt6i6u5s (

Here is an example of one of the little swr indicators where you just dim the diode https://qrpguys.com/tuning-indicator I’ve used that kind of a circuit as well as the two torrid system others

If you look at the schematic of your tuner, there is probably one or two resistors in a voltage divider chain that you could parallel something with to increase the voltage that gets to the meter.

When I'm googling for something home brewed, I use the term DIY. Such as DIY screwdriver antenna. I get the most hits that way. Vince.

Stay away from their 1/8" phone plugs. I had the tip of one fall off inside a jack. Problem was the jack was on the back of my Kenwood TS430 and I had to pull the back panel to get the jack out to get

Here are some code snippets from a project I did. It calculates SWR from the voltages read from analog pins A6 and A7. It does a number of other things, so here are the basic pieces of code for SWR

*Hello everyone and thank you for the work. I will want to know if someone has made the firmware for Nextion 3.5 with CEC 1.097. Thank you Michel*

Correct, no meter provided. A DVM is sufficient. Or could go into analog pin A7 (with an analog switch to select forward/reverse) of the Nano.? Perhaps both A6 and A7, use D0,D1 for the keyer if you

Allison, the instructions are pretty terse.? Looks like the meter/meters does/do not come with it.? How does it work?? Use a DMM to measure forward and reverse voltages and do the math in my

Bill, I guess you are right.? I ought to be able to do some experiments before we leave to get a sense for how the MFJ performs at low power.? If I can understand what readings correspond to 2:1, I