开云体育

Ls? My solutio? for the fragil tuning knob: Put a push switch parallel to the switch of te decoder (Enter) and velten beneath the tuning knob.? Than t doesnot change the frequency if touched. Much

Nothing is a vague description.? Do you mean the display does not light up at all or it lights up blank or it lights up and displays something but not what you expected or something else?? The more

after building trx in case .Display Shows nothing. No vfo Output no rx/tx can anyone help. ??

One consideration for that kind of design is the managing moisture on the inside of the enclosure.? The PA transistors could end up being the coolest part of the the inside of the case which would

All nice builds!? ?Enclosure choices at:?? www.contextengineering.com ( http://www.contextengineerng.com )

"Just an idea." But a good one! Jack, W8TEE

Yep. I already bought some for that very purpose! Jack, W8TEE

Very nice! Jack, W8TEE

Jack, I used the large cake from Harbor Freight and it has worked well.? It's not exactly watertight anymore after several revisions to my grand plan, but it works.? I used a Lexan sheet from the

I used my uBITX in the SKCC sprint last night and it performed very well.? I have the ND6T click kit installed but have not done the AGC kit yet so I had to ride the volume control a bit!? I used a

If the fan is generating RF noise, ?that can often be cured but putting ferrite beads on both of the leads as close to the body of the fan as practical. RF has a way of sneaking around on DC power

Haha, I keep sticking my finger in the fan so I'm waiting for this: https://www.ebay.com/itm/2-Pcs-Dustproof-Dust-Filter-Guard-Grill-Cover-for-50mm-PC-Case-Fan-E5O8/282946981964

Jack, You could use a single sheet of aluminum metal stock, and mount the PA transistors to that. It could have a lip that the acrylic could bolt onto. You could use aluminum angle stock to make the

I was in a hurry when I put my fan in so I went with this one https://www.digikey.com/product-detail/en/sunon-fans/HA60251V4-1000U-A99/259-1793-ND/6198731 and spent about as much for the grate as your

The fan is aurally quiet enough, but the case resonates a tad with it, so you can hear it.? If I wanted to do some vibration isolation and case panel damping work I could probably make it

I will probably upgrade the heat sinks and the fan will be mounted either on the top or the interior side of the case. I'm not a big fan of top vents for cooling. I may mount a small speaker on the

I'm assuming you will be operating with the case open.? I haven't done the math but I would think unless you fall asleep on the ptt or your key I doubt you would need anything more than some vent

This is the little briefcase I have. It came from Harbor Freight: https://m.harborfreight.com/11-12-x-7-12-x-4-12-aluminum-case-69316.html The board fits with plenty of space. There is also pleny of

Is the fan quiet, or does the rcvr pick it up? Jack, W8TEE

I'm thinking about using an Apache case from Harbor Freight. However, I need a way to cool the PA's with some kind of fan, but without destroying the watertight nature of the case. I'm going to use a