开云体育

Bump, Sure would appreciate some help getting fldigi to transmit. In that I have no trouble getting FT8 to transmit, I suspect it is a setting within fldigi that I have wrong. I'm using the setup

This is the regulation for amateur transmitters below 30 MHz: For transmitters installed after January 1, 2003, the mean power of any spurious emission from a station transmitter or external RF power

Factory software: https://github.com/afarhan/bitx40 Allard's fantastic version: https://github.com/amunters/bitx40 Hope this helps, Marco - KG5PRT

Howard, 10 W from IRF510s at 10M is doable I've seen it already.? For? that fact they will easily produce 10W on 6M (at 13V much more at 24V). The spur if its 46db down is not compliant as its out

? [email protected]> wrote:

Thanks for the response guys. I wasn't sure about the signal levels of the electret mic and if I needed to bypass the preamp. But from Johns info figured it was not an issue. I opted for the direct

I hear you there, Arv. I remember trying to convince my boss to institute revision control in 2 different jobs. I'd been using RCS for a while on my own, but both bosses were the kind that wouldn't

I just got to retest inserting a 1 KHz tone and also with speech. I tested on 21 MHz and drove the signal until I got my full output, 7 watts. The spurs were around -46 dB. With my equipment, I need

Found this but its not working, something is missing: https://github.com/afarhan/bitx40

Given what I've seen of them these last 40 years, I'm sure they are quite capable. Jerry

I replaced the Radruino and need to reload the software and I am looking for the source file to reprogram the Arduino Nano. Not a HEX file but the package with the .ino files etc. Thanks! Rogier

Github is a platform to serve advertisements to software developers.? The price they pay to advertise is providing free project hosting.? Microsoft would have to be pretty foolish to screw it up.?

Maybe this one: available from www.rockby.com.au ( http://www.rockby.com.au )?? There maybe a min order value though for non VK's. * *Stock No:*?12232 *Part No:*?45E2BF *Description:*?45M Matched

Arv, Being an anarchist by nature, I wing it. Before making changes, I save to a zip archive of everything I care about, named perhaps ubitxjg37.zip Then I create a new header at the top of the main

Hmm...I wired it as in the photo and it didn't work. Further research led me to wire it the way (blk, red, wht, grn from left to right) and it works fine now. Different jack, maybe?

We have a wiki page that shows one way to do it. /g/BITX20/wiki/Digital-Setup -- www.bitxmap.com ( http://www.bitxmap.com )

Raspberry Pi used CVS until fairly recently for Xastir. It's mostly having a collaboration point - the Git mechanism for distribution is pretty much independent. Dex, ZL2DEX

Jerry As I get even older I find that some sort of revision control system is needed in order to do any code work. I use CVCS on Linux to tell me when I last worked on a coding project, what changes I

Or get one of the little audio adapters (4 conductors)? for the combined audio port that has two short cables. Also you need to lift the orange wire for the PTT. Audio cards don't like it. :) PTT

Git was written by Linus to deal with the millions of lines of code in the linux kernel when changes are simultaneously being created by hundreds (thousands?) of coders.? Git is free and open source,