开云体育

Direction connection from the ubitx speaker jack to the computer microphone input (windows10 works, and wsjt-x decodes FT8.?? Any suggestions on how to connect the line out (or headphone output)

Forgot to mention, I would rather only ship to the continental US.

I finally finished my bitx40 and realized that with a small city lot and small compromise antennas, QRP is not for me.? So I am selling my ubitx kit.? It is unused and the box was only opened to

With the Nextion display you don't draw buttons in code. There is a program that you run that you use to design the screens that are shown on the display. Then you are just passing data back and forth

I'd love to see versions capable of the 2200 meters and 630 meters. This would be awesome Joe WB9SBD Sig The Original Rolling Ball Clock Idle Tyme Idle-Tyme.com http://www.idle-tyme.com

To keep the price down, I think hfsignals may as well continue to use the 45mhz filter. Perhaps claim 80m through 17m, beyond that is experimental, disable 15m,12m, and 10m in the stock firmware.?

I've taken the Sumatoy library for the BuyDisplay displays and modified it a little for our use. His library is about 10,000 lines of code, but we only use about 200 lines for our button library. I

Well, one difference is the 5" BuyDisplay is $34 versus $65 for the Nextion. The 7" Nextion is $75 versus $44 for the BuyDisplay we use. Jack, W8TEE

On 7.277? Don't hear a thing hear in Irvington NY

Just made contact with Stan, WS4JM! Good contact! New York to Tennessee . Dan W2DLC

The band is coming alive! give a call! W2DLC Dan

Heard the buzz, but nothing else here in NY WB2VXW

I've been told that the buzz is a Chinese over-the-horizon radar system. I hear it here (NJ) sometimes.? -- John - WA2FZW

Hi Daniel, Using RIT with the CEC firmware sounds like an interesting solution. (With the transmit frequency shown on the dial) Tom, wb6b

Thanks, Allison. The 2n5179 is actually a 12v part for Vceo. Since I run a 12v regulator to power the mainboard I'm not too worried about exceeding this. Next time I pull the mainboard I may stick two

Just to be safe, I mounted my irf510s (isolated) to the case.? In 2 months, I've had over 500 FT8 QSOs with no problems. Tom AB7WT

John: I use a Raduino as a VFO for my 4SQRP ZZRX-40 DC receiver. Works very well. I am using a modified version of Allard's v1.26 software used on the Bitx40. Made a few changes to tune 7.000 to

Had a QSO with Jerry in Iowa, Heard another 0 station, but could not get back to him. Does anyone else here the "buzz" that repeats every 8 minutes? WS4JM

Hi Dave, The CEC firmware does not totally "fix" the issue, but if you use the uBITX Manager software software it can change the CW frequency display to the transmit frequency. Just kind of moves the