开云体育

Howard I don't normally do SMD but this sounds like a good idea ... I'll need to order some for this side of the pond, but which physical SMD sizes are these components? 73 Chris G3SQU

thanks, John. Paul

Detailed instructions how to connect SDR here:? www.hamskey.com/2018/04/how-to-connect-sdr-rtl-sdr-to-ubitx-and.html?m=1 (

Congratulations!? I just ordered one on 18/4/2018, so probably have another month to wait.

Don't let it get to that potential. If you are talking about lightning and such, yes, short it to ground outside. I am referring to those gentle breezes and what I call static charges. Nothing major,

That is not where you want static charges dissipating! Chokes to ground, resistors, at the antenna. All a better place for it (the fire) to happen. Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ

In my opinion, the very best LED transmit indicator was the one that Derry Spittle (VE7QK [SK]) used in his Epiphyte QRP SSB series. That was just a 470 ohm quarter watt resistor through a small

The principle idea of my AGC mod is built around the potentiometer RF gain control. It is meant to work in concert with it. As such, that potentiometer works as a static dissipation device to ground.

Hello Thanks ? Best Regards, Stein-Roar Brobakken post@... LB3RE K3RAG Skype: lb3re.rag

The stock uBitx provides a DC path to ground. During receive, that would be K3-12,14, K1-12,14, L1,2,3,4,? and T2. Don's AGC fix adds AC coupling, there is no DC path: ?

Ian's software will do both. Do a search on KD8CEC on this forum, or?see?www.hamskey.com ( http://www.hamskey.com ). 73, John

I'm sure it happens. But not consistently. You need wind and something to create the charge like blowing dust. If the tuner is dissipating the charge why doesn't the rig itself do it, at least with an

I used an old Motorola hand mic. I just packed the electret element with a piece of acoustic foam in front and enough behind it to hold it place with the back on. Works fine. tim ab0wer "Nelson"

uBITX ordered Feb 26, received via DHL today.? Can't wait to begin!

Here is my mic housing, I printed it up to work with the supplied parts.? The element drops in to the hole, the button snaps into the side, the three posts have holes in them to wrap the wires for

Hello I am planning to buy/build a uBitX for dxped use. But not sure about CAT control and VFO split ??! Best Regards, Stein-Roar Brobakken post@... LB3RE K3RAG Skype: lb3re.rag

Thanks Ashhar, Paul

That is to be determined based on the performance I get. Right now, I will adjust VR1 to get 5 watts on 40 meters and go from there. Howard

Sorry, I meant to show a picture of the front of the completed mic also... -- I always thought the Universe was a wonderfully strange place until I studied Particle Physics - I now know the Univ

I used an old Regency CB mic case, removed the old mic element, cut down a small plastic funnel to fit where the original mic element went and cut the other end of the funnel at appoint where a Radio