开云体育

Mike, this is a very interesting approach. How big is your case? I like how compact it all is. -- Karl Heinz - K5KHK

Hello Mike, Here are some pictures of my uBITX build. Thanks for looking. Mike N6CMY

Pete I have a Hi-Per-Mite in my uBitx and it makes a huge difference. ?I'm not switching it, but I've installed the SCAF in other things such as my KX1 (I had a short article about it in QRP

Glad to hear Tim. I hope it will be useful later as well. I'd rather get the code fixed. I need to sit down and noodle through that to find what needs a change. Sounds like we are both ready in time

The Factory software automatically switched LSB to USB when tuning above 10MHz and USB to LSB when tuning below 10MHz. For whatever reason my uBitx had the wrong BFO frequencies saved as it came

Looks good Vic! have a look at the method I use. You don’t have to be as careful with the LCD cutting

-- Thanks for the tip. Didn't know you did this stuff Vic. I'm waiting for my kit. Ordered it last moth. George W3GWM

Have you ever cut into an old USB printer cable? Randy

You have figured it out. I gave up.. Farhan has his mysterious ways of being thrifty. The real reason is as I think is to save one data out control line from Raduino. As Jerry said the relays are

I finally loaded up the kd8cec software early this morning to give it a try. When checking into the KS WX net this morning there was another qso about 2kc below the net frequency. So I tried Ian's if

The relays used for the output filters are put together in a clever way. They use three relays to control four different filters. When KT1, KT2 and KT3 are not energized, it selects the 21-30MHz

Here is a description of the automatic L-Network auto tuner I built for my uBitx (It can be made to fit other radios). ? My uBitx is targeted as PM/field portable operations so space and weight are

thanks brian regards joe g0liq

I have found they are not screened chris

If I recall my physics, I believe the formulas for resonance for a mechanical circuit are the same math equations as those for an electrical circuit. Because the speaker is a transducer, there is a

It all makes sense. But was surprised at how cleanly the mechanical resonance showed up in the electrical test, looking for all the world like an LC circuit. Not something I had thought a lot about.

Probably - there are 4000 of these kits now in the hands of constructors!?? I bet there are some pretty interesting builds out there! Mike ZL1AXG

Jerry, The speaker is like a LC circuit and it has a resonance. The frequency is dependant on the mass of the cone and the elasticity of the suspension (including the enclosure air). The for formula

Very nice! May you receive many contributions.? Sent from Yahoo Mail. Get the app

The ubitx.net website now incorporates a build gallery.? I figure this could be very handy for new constructors to source ideas for enclosures, layout and labelling. It can be found as the last item