开云体育

Keep Calm my friend Aurélio, I ordered my uBitx in Dec 23 and dont receive notice from hfsignals at this moment, I just follow the dispatch news here in the list. I believe that next week it will be

Where is a good source for the black &silver knobs for the uBitx?

I2C ADC Board:? Adafruit ADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier [ADA1083] ( https://www.amazon.com/gp/product/B00SK8JHHQ/ref=od_aui_detailpages00?ie=UTF8&psc=1

Does anyone know what the typical output level of the first AF amp should be for a strong signal? I built the AGC amp shown in the message by Joe Puma and the AF output begins to distort with an input

Is this the board?

I would think they have bitx 40 in stock I am guessing ubix may be delaying things chris

Same here. I still need a case and I'm hoping by the time my uBITX shows we'll have a path for flatter PA drive (I have some IRF510's and RD16's in a bag).

ok now that I slept for 12 hours doing better.? ok square pad # 12v---pin #3 no volts---pin5 no volts---pin8--0 volts----pin#9--no volts---pin#12---12 volts---pin #14 12 volts---pin #16--12 volts.?

Yup. I’m still waiting for a case option to become available so I have time anyway Joe KD2NFC

Hi Chris, "It's a Long Way to Tipperary" like the British music hall song told us. Glad you received yours. I ordered a BITX40 with Raduino on Feb 7. PayPal notified me a few minutes later. So far

I ordered mine early/mid January and I set my expectation for early March(ish) after reading the lists and seeing the traffic. I'm cool with that, it's clear that the uBITX has caused a LOT of demand

Building SWR bridges is pretty easy for most people here and there are many examples on the internet to follow if you want one. The difficulty with the uBITx in its current form is finding a way to

The project is on the right track. Everything is already in a metal box (cookie), it is already possible to transmit, getting about 12W in 40m. and approximately 7 in 20m. For the other bands I do not

I ordered on Jan 17th. They said 3 weeks before my item ships 2 weeks ago. Yikes, I’m in for the long haul. ?

Get well first then worry about your radio chris aol.com@groups.io> wrote:

I just picked up this kit works great stock up to 15W if you have a pic programmer you can flash the SWM3 hex and get it to over 40W. ?I have tested this to 50w with the SWM3 firmware and it works

So there shouldn't be a 10K between the diode and the gate of the fet? There isn't one on the original schematic and there aren't any pads on the circuit boards for one either. tim ab0wr

Ordered on 01 february at moment i don't have notice if rtx was sent. i think there are problems with the orders, this is the answer:"It will take few weeks for the order to be shipped. Tracking

Pop down to my Blog for further details, then come back here and talk about it: http://g1kqh.blogspot.co.uk/ 73 Steve

Good morning Ian, With the CW TX->RX Delay set low 0-140 the extra dit/dah is random, with it set higher it becomes more pronounced. At the default 600, it would give an extra dit/dah after every