开云体育

Anything i can check here?? Wherevis original factory sketch to see if i can upload it so i inow was aduino is fine..

I tried the filter outboard on the bench and it was fine. Recently I was poking around with the power on and I discovered that touching ground to the filter affected the noise. Although the ground

i plugged the pins in tge wrond side. Now the sreen is like this? i guess i ruined the arduino nano board a d maybe something else I see that arduino power led is fine how can i check that it is

how do i find my deliver time frame and approx shipping date could hf signals anser please ordered mid january tks crofter

how can i check if a fet is shorted or blown? i have this piece of hardware but i have no clue if this values are fine here you have a brand new irf510 here a used one that may be dead but i

I don’t see any help that may lead to solve my problem. Sorry guys this is aint funny anymore

to my memory in a video https://www.youtube.com/watch?v=sEQNAekjkNk&t=2662s Ashar Farhan explained that he had problems with some relays. He showed a test jig to test failed boards for the relays.

This may be due to the si5351 library version that is used by the original stock firmware v1.01 Try upgrading the firmware https://github.com/amunters/bitx40 It has built in si5351 routines (no

As here

I got them box's at my local shop used them for my bitx sets nice cases chris G0WFH

Today the following items were added to http://uBitx.net/ Alternative software for your uBITx <http://ubitx.net/2018/01/28/alternative-software-for-your-ubitx/> Tuning up

A handy reference source is a great idea, thank you. In the enclosure tag the New Zealand sourced box is available in the

I should have posted this before.? To any and all outside the lower 48, if you want a board send me your mailing address and I will check with the post to see about cost.? It may or may not be

Anyone thought about using a PiZeroW (or even a regular RPi) for controlling a uBitx? I thought to myself, while pondering my design decisions, "Hey, a PiZeroW is $10. A Teensy3.2 is $20..."

I definitely want (1) kit Gary Sent from my iPhone AA7GW

I have 10 kits ready to go with another 10 for kits or pre-built. This was posted on DuWayne KV4QB's site found here?( http://kv4qb.blogspot.com/2016/11/bitx-40p-building-part-1.html ) Thank you

The band change relays operate only when the PTT is pressed in the uBitx. I have made mods to keep the relays operating in RX and you can hear the band change then only. Disadvantage is that the RX

Dave Thanks for your information. My modified code (Ron's cw keying) does not use A7 for factory shipping users. Until now, the firmware concept was applied without modification of the hardware. I

That's awesome! I'm jelly! (jealous) Rob

72/73 de Chas ai4ot