开云体育

Absolutely. My plan is to use the same headset/mic combo that I use with my computer for video conferencing. If you wanted a very lightweight solution, you could wire up a TRRS socket and use earbuds

Anyone thought of using the commonly available computer headphones/mic combo? Regards Lawrence

Many "Arduino compatible" things out there simply mean they work in the IDE - they don't ensure any kind of code compatibility. Any lower level code that's fiddling with registers or making

Everything you need us located here: http://www.hfsignals.com This schematic is here: http://www.hfsignals.com/wp-content/uploads/2017/12/ubitxv3.pdf Marco - KG5PRT

The answer is that the old connectors are so easy to solder!

I forgot to add that there is one additional step the can be added if you want a very professional-looking result for your water-slide decals. ?After the decals have been installed and before you?

I'm kind of new to the BITX, but have a BITX40 that works really well.? My question is:? Where can I find the schematic and related data needed to build a uBITX?? Thanks Rye K9LCJ since 1954

I'm using a Baofeng on my bitx40, I need a different option on my ubitx as the two independent jacks (3.5 and 2.5mm, a precise distance apart) sharing wires between mic, speaker, and PTT is making

The smallest connector would be MMCX but you really don't want that (the connector typically used on GPS modules.) ;)?? 73 de Paul (VA6PW, VE6KWI)

Tom et al :? The decals for my BITX40 were done using Ink-Jet Waterslide Decal paper.? The end result is similar to decals that we all probably remember putting on plastic model kits as kids.? I do

Cringe

You would need an RG45 case mount female connector and would also have to wire it for ptt/mic etc in the case. Just me but I wouldn't use it for the bitx.

I’m thinking of replacing the Radino Arduino with the EPS-32S chip (WiFi and Bluetooth) for memory and memory group creation, editing and recall. The control rf is passed through seams in your uBitx

Banggood has the case shown in post 35500 for $10: Excellway? EF01 Electronic Plastic Shell Cartridge Handle Project Case Desk Instrument 200x175x70mm | | | | $ 9.99 | | | | | | | Excellway? EF01

Google "clear printable sticker paper."

That looks good. What do you plan for the open space (or was that done for front-panel control space)? I’m considering building a linear power supply or perhaps a LiIon pack into the box.

Hi All, I have a uBITX on order. I want to install AGC. In anticipation, I modeled Farhan's suggested AGC circuit from 13/11/16. However, in the model it appears the gate voltage to the FET never gets

Only another lpf and code changes required? Is there a spare uc pin to control some relays? Are there other considerations? Regards Simon VK3ELH

I am planning to get this case for my uBitx. https://www.ebay.co.uk/itm/HF-1-9-ABS-Plastic-Enclosure-Connection-Box-Project-case-Instrument-Shell-Cover-/301496955397

Yes. I would also like to know how you put the lettering on the plastic panel Michael Babineau ( /g/BITX20/profile/@ve3wmb ).