开云体育

This just compiled here? Mike, WA6ISP

It should be the standard LCD Lib, but need the SI5351 and Rotary. I will try it, and email again the file. Mike

I tried to compile, but get this error: Build-Optionen wurden ver?ndert, alles wird neu kompiliert D:\BITX_40\WA6isp\RFGen5351V3\RFGen5351V3.ino:55:17: fatal error: LCD.h: No such file or directory

I have hacked up a generator. I hope this is the latest? Uses Raduino or RaduinoX and Rotery Encoder. See if it works? Mike, WA6ISP -- Mike Hagen, WA6ISP 10917 Bryant Street Yucaipa, Ca. 92399 (909)

Hi all I now have a spare radio which I would like to use to put together a little signal generator. No point in regards inventing the wheel if anyone already has a simple sketch I could use. I have

Try Ebay number: 201853209420 201853209420 eBay item number: 201853209420

Tom, this is a regular Sunday evening event.? -- John - WA2FZW

I hope there will be others or maybe a regular thing, as I have not put my bits together yet.

Q13 is an mmbt3904. ? It runs hot, a 2n3904 would be a better choice if replacing it as the leaded version can dissipate more heat. But there's a hundred different parts that might reduce power on

I have a 3D printed Bezel as addition to the RaduinoX "better" Raduino. It comes with some Flat Head metric screws, and additional plastic standoffs and screws. There all also spacers to hold it

Try the Early Bird net at 8:am pst. On 7.186 every morning.? Most hams on the net? check? in on bitx 40 or others QRP. The net is in Nevada? great? for the Western half of the US. Francesca W7LTG

Here is one: http://www.hobbytronics.co.uk/lcd-bezel-16x2 You need to search for a “lcd 16x2 bezel” Karl Heinz Kremer PDF Acrobatics Without a Net PDF Software Development, Training and More...

I made one, with an X-Acto knife, and some of the plastic from a Wendys salad dish. It wasn't the thin stuff, it was about a millimeter thick, and just the right consistency for this job. Sent from my

I've had an hour browsing the old posts looking for a source for a trim panel to go around the standard bitx40v3 display. No luck finding anything. Does anyone have source for such an item? They seem

I have one left from the VK group purchase, Ross. $15.60 including postage anywhere in Oz. Bill, VK7MX

My apologies for the bandwidth, I've now found the information I sought. Ross

I've delved into the backlog of posts and found myself unable to ascertain whether there are any pcbs to be had.? Very interested in acquiring 2 or 3. Cheers Ross

Just a reminder! -- John - WA2FZW

Hi, I've just released raduino v1.27, download it from https://github.com/amunters/bitx40 ( https://github.com/amunters/bitx40 ) New in this release: * Improved the suppression of the spurious carrier

Good Evening! What is the nomenclature on the Q13—need to try that replacement to see if the power picks up...only ~100mw now, if that. 73, John/N6VTS