开云体育

Used a combo of Drill press and punch with some files. I need to get a saw even a nice small metal hand saw. It was all a squeeze for sure AGC is going to be tough hihi

I always drill 4 holes on the inside of the window lines and use a hand fret saw to cut the center out. Then you need some elbow grease to make the hole neat. Now if you can get a bezel for the

Aperture all within display outline, so a file and a bit of judicious 'elbow-grease' would cure any uglies. All those extras! Well done!

Nice job getting all that stuff on the panel! I put the mic, phone and key jacks on the side of my box to save space on the front panel for future additions. Here's the answer to making neat square

Whoops! Sorry, that wasn't intended for the group, just Martin. Bill, VK7MX

G'Day Martin Jack W8TEE's VFO boards arrived from the USA yesterday. I bought 15 boards from him and have therefore divided my total costs to date by 15, yielding a landed price per board of $12.30.

It's done took a few days of mods and hole drilling still have to work on my LCD display cutting in .....as you can see not so good at it yet hihi. In total it has an added Keyer, Nescaf Filter and

Rather than concentrating on a number, I'd be testing at what is required for your area (largely dictated by ambient noise level).? That is your rig should be very quiet with no antenna connected and

I raised it up yesterday.? It is fed with coax.

Low pass filter in BITX works best with 50 ohm input, otherwise sensitivity will suffer... With long or short wire I always had to retouch my BPF...

One need to retune ( 27 pf variable trimmer + one air wound LPF coil ) BPF if antenna is not 50 ohm, long wire is not 50 ohm... was talking about old 2.2uh inductors, Didn't tested 6 uh inductance BPF

For SSB about 1980 miles to KL7CWN with 5w and 80 meter ocf dipole at about 25 feet. On wspr I logged AU at 9246 miles.

A very good site, kits, tings to build, and books to download. http://www.hanssummers.com/k6lha-design-book.html Just a note on this file. NOWHERE IN THE FILE is the name of the book mentioned!!!! I

Did you have it up when I talked to you last week? That was the first time that I heard you since we started the group. I too have an inverted vee up 50' Ed W0OIC

BITX QSO Night, Sunday, July 9, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere Join us as we make contacts from BITX40 to BITX40 on 7.277 MHz in 40 meters! To participate, call CQ BITX

To beat this poor old dead horse a little more. Back in the 80s Borland got it right with Turbo Pascal. Back then Microsoft was charging something like $500 for a compiler and copy protection wasn't

Let's take the subject of *Arduino Programming*. There are literally dozens of published books about that subject. If you look at the Table of Contents, they all cover the same thing. How many do you

I use the supplied mic insert on a old pen works we'll I use PTT on the radio

Sorry, posted with the wrong date!? This Sunday, July 9 and every Sunday is BITX QSO night.

BITX QSO Night, Sunday, July 16, 7pm Local Time, 7277 kHz in North America, 7177 kHz elsewhere Join us as we make contacts from BITX40 to BITX40 on 7.277 MHz in 40 meters! To participate, call CQ BITX