开云体育

blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white !important; } What 3D printer are you folks

I also used supports, the big Knob is hollowed out some places. I made 2, both came out perfect. Simply3D makes me an Expert! Takes a exacto knife to dig out the supports. I love that program. If you

I used Black PLA and the long print time for better print.

Encoder or Pot

Volume

Sure When you go get a battery buy a couple 6-32 set screws. Maybe a 1/4" and a 3/8"? The darn things were $.32 at ACE!

Those look awesome. Any chance you might share? Matt W5LL Sent from my iPhone 7

Bob We are also waiting for an updated sketch that provides the code for an if offset which is needed required for tuning Art Sent from my iPhone

Here are some knobs I drew up and printed. Also an LCD Bezel. I have a speaker mount and grill ready to put in too. Mike, WA6ISP

Haven't tried the customizer yet. Was hoping maybe someone had found some somewhere that worked. My digital calipers need a new battery so I am unable to get the correct dimensions of the shafts to

I have the VFO board and parts. I was able to compile the code. Before assembly I would like ask some questions about the VFO board. Although the board construction manual is great, there is no info

Did you try the knob customizer, or just ones that had already been designed? Customizable Knob! by charliearmorycom RichKC8MWG | | | | | | | | | | | Customizable Knob! by charliearmorycom Design your

Very nice! I really like the plastic cover over the display. I might do that myself! When cutting small pieces of plexiglass or lexan, I remove the protective covering that comes on it and use masking

Hi, To cut the window I drilled holes at the corners then used a scroll saw. I finished by hand filing. It was not easy to get straight lines! I did the marking up and the first drilling on the back

Looks fantastic? how did you cut the window forvthe lcd? a little bit if weight is wanted so you drag the rig while taking your mic

I moved my Bitx to a smaller aluminium case. It’s very strong and compact, but now the Bitx weights about 1 kilo! The box is extruded aluminium from Aliexpress - 145*54*200 mm. Cost about $US16

Hmm...Is there a Roomba in somebody's future? Hi. Maybe you can program it to go fetch lost smd parts... Incidentally, programming the ATMega32U4 is not exactly for the faint-in-heart; It is like the

Could be due to any or many of the following reasons: 1: Low audio drive - very likely (I use an amped Motorola mic and it goes up to 10W) 2: Low VFO or BFO levels 3: BFO frequency may need tweaking

Jonathan, radios amplify and modulate radio frequency (RF) signals, that RF signal is generated by the local oscillator (LO) in this case a synthesized VFO. Without it you don't have anything to

Thanks!