开云体育

Thanks, that helps.

Ah yes, I forgot about your situation, sorry about that. Hope the mess in your office will be cleared soon. Is there anyone else who would like to try the si5351 library v2.02 please? 73, Allard

Daniel: I think most people simply hacksaw the shaft to their needs. When I was testing the original Raduino, I could not find a knob in my junk box that fit...they were all too large. Two layers of

Allard: I'm still recovering from the flood in my office. The insurance claim is still not finalized and my B40 is still in parts on the bench for reasons I've explained before. I will try the

For anyone that has had no power out due to shorting out the PA in error. Have you had to replace the U3 5 volt regulator?Troubleshooting in this slightly (to say the least) cramped area is difficult.

hi BITX40 friends, my BITX40 arrived: ordered 2017-02-11 shipped 2017-02-23 arrived at German customs 2017-03-04 customs worked on it on 2017-03-18 arrived on my workbench today, 2017-03-24 number is

If you mean the shaft length, you just cut them to the desired length based on space and the knob used. Sent from Mike's iPad WA1MAD

Thanks John great improvement!

Hi Chuck There is this circuit that I have not yet built, but I intend from the PY2OHH Site. The operation is simple, the audio signal taken out of the volume potentiometer is amplified by the 2N2222

hi, Is there any reason the SPI pins D10, D11 and D12 are neither connected nor accesible from the Raduino PCB ? I would like to hookup a SPI TFT to it but not sure if they where left out on purpose

Very good John thank you. 73 de Júnior PY2ADA

Thanks Jack, OK, that's good to know. ?If it's Nano-based that should be easy. ?I have the parts to make up a "genuine" Raduino so I'll get the real code and add in the CAT feature to see how it

Hi Amey, just to make sure that we are not comparing apples to egggs, can you please upgrade your IDE to 1.8.2? When all software and libraries are up-to-date it should really work. It shouldn't be

I have a stock of?2n3904c 's. Is it ok to replace the Q7( output of oscillator VFO) with?2n3904c.

Hi Allard Are you using the latest Arduino IDE? (current version is 1.8.2) -- I am using 1.6.0 Did you download raduino_v1.0.3 from https://github.com/amunters/bitx40 (

Thanks Jack, would you mind trying 2.02? Just to see if you can reproduce the tuning click problem? 73, Alllard PE1NWL

damn! I just wish someone could be the 'benevolent dictator' for the bitx40 repository to test and integrate all these gems. - f

This library uses " SoftwareSerial" instead of the hardware uart ports. I don't know how hard it would be to change that if it matters. Arduino FT-857D CAT Library ( http://ve3bux.com/?page_id=501

For the power/volume and tuning knob, did you cut them to size, or buy a different set from what came with the kit?

I'm using version 2.01. Jack, W8TEE To: [email protected] Sent: Thursday, March 23, 2017 9:10 PM Subject: Re: [BITX20] Raduino getting stuck on SI5351 init Jack,please have look at my posting