开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. BITX20
  2. Messages
Single Messages Topics Expanded Polls

Re: Auto TX Smart Filter Controller #nano #arduino #filters #ubitx

 

If using an external filter box and the uBITX internal filters remain in place,
it seems that the external filters would only need to be activated in transmit
mode.? That could save some power when in receive mode.?

Arv
_._


On Mon, Aug 13, 2018 at 11:44 AM ajparent1/KB1GMX <kb1gmx@...> wrote:
Tom
>>I wan't to build a filter I can use with the uBITX. However, I don't want to build a filter that is strictly tied to the uBITX. <<

To me that makes a lot of sense.? A standalone project that can be used for many other
projects.?

Suggestion only..?
A led per filter to signify what one was selected (led and resistor across the relay).?
Then a LCD is not needed.? Might be a reasonable simplification.? Also you can use?
latching relays (power savings, battery powered) that may be handy for portable.

A manual filter selection using one button in a round robin form in case you want the
filter on frequency before transmitting or for receiving.

Allison

Join [email protected] to automatically receive all group messages.