Much Better Raduino,
I also have The RaduinoXP (Mega Pro Based), it is larger, my not fit what you have boxed up?
I still have lots of Raduino X bare PCBs and completed boards. In case you blew up stock Raduino or want to make alternate projects.
I have sold a dozen or so, but ordered 50 PCBs.
For those wanting a Raduino board.
There is a better option than the orginal Raduino board with it Soldered
- in Nano.
RaduinoX? PCB designed to add some features.
I have Lots of Bare PCBs and some assembled and tested.? Lots of Bare PCBS!
Several sold to guys in this group.
I used this board, LCD, and Rotary Encoder to make a nice dedicated RF
signal generator.
1) I wanted to be able to plug Nano in and out, not soldered. I wanted
the USB connect next to the side of the cabinet so I can program without
taking the lid off.? I will make a small hole.
2) Added, diode protection, more filtering and conditioning on the power
input.? Regulator is bolted down.
3) Added a dedicated connector for Rotary Encoder with pullups and
bounce capacitors.
4) Added an I2C connector.
5) I wanted proper Level Shifting to the Si 3V part.? Added FETs and
pullups for that.?? Original did not do that.
6) Added D0 and D1 pins on PCB.
7) Kept power and VFO connector on 5P header so no changes to my present
wiring was necessary.
8) Put contrast Pot where you can get to it.
9) Complete documentation.
10) Fits original LCD perfectly.
Take a look if you are interested.
motdog@verizon dot net
Mike, WA6ISP
--
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID "MotDog@..."
Mike@...
