There dedicated connectors for I2C and Rotary.? And a dedicated
connector for the other 2 clocks, with grounds for coax.
I got the interrupts working for the encoder today.
PCBs will arrive next week for more testing.
Yes the are large, but all port pins are brought out to Molex.
It will mount standard LCD or 20x4 LCD.
Still only need 1 connector (5Pin) to operate on Bitx.? All
others are optional for the changes that have been implemented.
TNX & 73's
Mike, WA6ISP
On 11/21/2017 3:49 PM, Mike Woods
wrote:
I am sure many will be interested in your new
board Mike!
Three questions:
1) dimensions?? It looks like it could be around
75mm deep and 85mm wide which may challenge existing
enclosures.
2) is there an i2c connector?? It would be
helpful to be able to expand to use other i2c devices (e.g.
temperature sensors, digital pots, etc.)
3) cost?
4) is there room topside to mount a dupont
display connector if you dont want to attach directly to the
1602 or 2004 display (ie cable connect).? This would enable
the card to be mounted alongside the Bitx40 or on top of the
Bitx40 board using standoffs.
It looks like something I would be interested in
acquiring!
73 Mike ZL1AXG
On Wed, 22 Nov 2017 at 6:50 AM, Michael Hagen <
motdog@...>
wrote:
A New Baby
(and Banana) have been Hatched!
RaduinoXP
Been working on this Big Boy for a month now.? Completely
compatible
with BitX.? Has the one connector (5Pin) that has +12, Gnd,
and Clock
for BitX.
Uses Mega 2560 Pro Embed Arduino.
Just like RaduinoX, just connect that one 5 pin Molex to get
BitX going.
Full of connectors!!? 14 of them.? 50 Digital Pins and 16
Analog.
12 Pin Molex have 10 pins for I/O and +5 and Ground.
Like RaduinoX, I2C are level shifted to 3.3 to the SI5351.
Heat Sink on the +5V regulator with diode and filtering.
Double Sided and well laid out with lots of ground plane on
bottom.
Mounts standard LCD or 4x20 as shown in the pictures.
It is a compact as I could get it, but may still not fit
enclosures
already built.
This is Debug board.? A new order of PCBs will arrive next
week.
Yes, I am tossing out the first order of PCBs (I screwed up
4 lines).
73s
Mike, WA6ISP
--
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID? "MotDog@..."
Mike@...
--
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID "MotDog@..."
Mike@...
