Re: Emailing: RaduinoXPbo1B, RaduinoXPtopA, RaduinoXPtopB, RaduinoXPbo1A
|
I am sure many will be interested in your new board Mike!
Three questions:
1) dimensions?? It looks like it could be around 75mm deep and 85mm wide which may challenge existing enclosures.
2) is there an i2c connector?? It would be helpful to be able to expand to use other i2c devices (e.g. temperature sensors, digital pots, etc.)
3) cost?
4) is there room topside to mount a dupont display connector if you dont want to attach directly to the 1602 or 2004 display (ie cable connect).? This would enable the card to be mounted alongside the Bitx40 or on top of the Bitx40 board using standoffs.
It looks like something I would be interested in acquiring!
73 Mike ZL1AXG
On Wed, 22 Nov 2017 at 6:50 AM, Michael Hagen < motdog@...> wrote: A New Baby (and Banana) have been Hatched!
RaduinoXP
Been working on this Big Boy for a month now.? Completely compatible
with BitX.? Has the one connector (5Pin) that has +12, Gnd, and Clock
for BitX.
Uses Mega 2560 Pro Embed Arduino.
Just like RaduinoX, just connect that one 5 pin Molex to get BitX going.
Full of connectors!!? 14 of them.? 50 Digital Pins and 16 Analog.
12 Pin Molex have 10 pins for I/O and +5 and Ground.
Like RaduinoX, I2C are level shifted to 3.3 to the SI5351.
Heat Sink on the +5V regulator with diode and filtering.
Double Sided and well laid out with lots of ground plane on bottom.
Mounts standard LCD or 4x20 as shown in the pictures.
It is a compact as I could get it, but may still not fit enclosures
already built.
This is Debug board.? A new order of PCBs will arrive next week.
Yes, I am tossing out the first order of PCBs (I screwed up 4 lines).
73s
Mike, WA6ISP
--
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID? "MotDog@..."
Mike@...
|
