You need to test it with 50 Ohm load (a short leaded resistor or
SMD).? The generator needs a 50 Ohm output, that may be the major
problem.? Use 100 MHz scope and good x10 probe.
If you have a signal generator that goes to 7MHZ.? Load it with
the 50 ohm resistance.? The non-loaded value on the scope should
go to 1/2.
That would be good, the generator has 50 Output Z.?
Mike, WA6ISP
On 6/20/2017 12:39 PM, EA3IAV wrote:
toggle quoted message
Show quoted text
I do have an oscilloscope. I may inject rf signals and
see if they are neutralized right?
