T41-EP V12 Board Connections and Development of the VHF-UHF Board
|
This shows the diagram for two receivers, but just ignore the second one and the 100W amp. Jack, W8TEE
On Sunday, April 13, 2025 at 01:17:11 PM EDT, J P Watters via groups.io <jpwatters@...> wrote:
Dr. Bill and Oliver,
?
Al and Jack could not have found a more capable pair to take the T41-EP project over the horizion into what we will find in the infinite Experimentation Beyond.
?
I have searched but have not found a board interconnection diagram that shows how the VHF/UHF board is proposed to connect.?
It seems like I have run across that but I need some guidance to find it.?
?
..jpw J P Watters
KC9KKO
Morris, IL USA
?
?
?
-- Jack, W8TEE |
开云体育I can give you some insight for how the VHF-UHF module works.? It’s a complete module except for the I/Q decode and code.? It has its own antenna connections,? Connects to the control cable… has connections for the I/Q in and out (as one of the RF Boards)… Meaning it is a true SDT by itself less the I/Q Code/Decode and control that is provided by the MAIN board. ? ? Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ VP2EHZ ? Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois ? Owner – Operator Villa Grand Piton – J68HZ Soufriere, St. Lucia W.I. Rent it: ? Moderator: North American QRO Group at Groups.IO. Moderator: Amateur Radio Builders Group at Groups.IO. ? email:? bill@... ? ? From: [email protected] <[email protected]> On Behalf Of J P Watters via groups.io
Sent: Sunday, April 13, 2025 12:17 PM To: [email protected] Subject: [AmateurRadioBuilders] T41-EP V12 Board Connections and Development of the VHF-UHF Board ? Dr. Bill and Oliver, ? Al and Jack could not have found a more capable pair to take the T41-EP project over the horizion into what we will find in the infinite Experimentation Beyond. ? I have searched but have not found a board interconnection diagram that shows how the VHF/UHF board is proposed to connect.? It seems like I have run across that but I need some guidance to find it.? ? ..jpw J P Watters KC9KKO Morris, IL USA ? ? ? |
开云体育Except that modules that have not been released yet are not part of the connection sheets.? Ask though if you are interested.? The big ones will be the Tuner, the 100W module, and the VHF-UHF module. ? ? Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ VP2EHZ ? Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois ? Owner – Operator Villa Grand Piton – J68HZ Soufriere, St. Lucia W.I. Rent it: ? Moderator: North American QRO Group at Groups.IO. Moderator: Amateur Radio Builders Group at Groups.IO. ? email:? bill@... ? ? From: [email protected] <[email protected]> On Behalf Of Phil Taylor via groups.io
Sent: Monday, April 14, 2025 6:33 PM To: [email protected] Subject: Re: [AmateurRadioBuilders] T41-EP V12 Board Connections and Development of the VHF-UHF Board ? JP ? On this page of Dr. Bills GitHub, you will find all of the interconnections: ? ? I just thought I would add this as there are separate Control Wiring and RF/AF wiring diagrams in that folder too. There are some of the connections on the "Full Options" diagram missing. Then then there are some power and control connections, which are only shown on the "Full Options" diagram, so you kind of have to mash all 3 diagrams together to the full picture. ? Regards? Phil VK2KKZ ? On Mon, Apr 14, 2025 at 03:17 AM, J P Watters wrote:
? ? |
Jack, W8TEE
K9HZ