Display Driver 3.3V ONLY board
¿ªÔÆÌåÓýAnother Friday share¡ The new Display Driver board.? This is the 3.3V ONLY board.? It¡¯s the cheaper of the two options.? Use it of you don¡¯t (and won¡¯t) use 5V to power your display (if you will or do, use the other one).? ? Bare Board: ?
? Front side complete: ? Plugs into the ¡°DISPLAY¡± connector on the right side of the MAIN board shown here:
? It can go on the bottom of the board too¡ just keep the SAME orientation of the driver board to the Main board but put the connectors on the opposite side of the boards (all three shown on the wrong side of the MAIN and Driver boards for use on the bottom of the MAIN board): ? ? Dr.?William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ ? Owner - Operator Big Signal Ranch ¨C K9ZC Staunton, Illinois ? Owner ¨C Operator Villa Grand Piton - J68HZ Soufriere, St. Lucia W.I. Rent it: ? email:??bill@... ? |
K9HZ