开云体育

The “59” thing is automatic but most signals really were 59…. Repeats were more due to noise. Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big

Yeah check this out: Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois Owner – Operator Villa Grand Piton -

It's a single hop from here.? Strong signals.? I had put away the MFJ loop before I heard they were on 15M too. Very strong signals heard on 15M even with a non-resonant antenna. 73 Greg KF5N

I got him on 21.466.350. Couldn't hear him on 10M. He gave me a "contest 5 by 9", but I had to repeat everything :). I was running about 700W to a vertical. - Jerry

The op said they are also on 21.446. 73 Greg KF5N

Just worked St Lucia on 10M with my T41, the signal is hammering in to south Florida. I used an MFJ loop antenna, so my radiated power was probably on the order of 1 watt. 73 Greg KF5N

You have what you are asking for. Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois Owner – Operator Villa

That leads me to the answer for what I was trying to figure out.? I could have phrased my question better.? The OPA2209 is available in two packages.? Looks like everything else is 8SOIC so I now

Albert Trying to clarify what your mods are.The following in reference to your changes? * Change the following capacitors to 20pF - C33, C37, C46, and C54 * Replace capacitors C35, C48 to 0 Ohm

Same RF board. Just changed the two op amps for lower noise parts. You can still use the original parts of you want… and the bom was updated a couple of months ago. Dr. William J. Schmidt - K9HZ

Will you be updating the BOM for your new RF board?? I was going to add the new op amps to an order I'm working on and I know just enough to order the wrong variations.

*** Hardware debug? - Jerry, KF6VB

I actually have a couple pico 2's. No wifi, though. It does do SPI, so it could control our current display - assuming that there's an RA8875 library available. The first step would be to isolate all

Hi Jack, do you have any links where we can see that info about the *pi pico 2*? afaict, news has been released that the original Pi Pico has been bumped from 133MHz to 200MHz. I don’t see anything

All: I've also experimented with the XIAO processor from Seeed Studio. It's about the size of your thumbnail and costs $5: It has 256K of flash and 32K of SRAM with 19 general I/O pins, ADC/DAC pins.

All: I just read that the RP Pico 2 is now capable of running at 200MHz, up from 133MHz earlier. Using CMake, the new speed setting in the compiler is a symbolic constant:

Huh… pretty ingenious… Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ VP2EHZ Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois Owner – Operator Villa

Doug, Great idea! Jack K3JAS

Yesterday's delivery brought a bent heatsink.? I didn't want to throw out something that was still usable or use it so mangled so I did what we do.? I drew and printed 2 combs in a few minutes to

Keep that thought! I’m at my contest station in the Caribbean for the ARRL DX SSB next weekend… We can do this when I get back home. The folks at home won’t know what to do! Dr. William J.