开云体育

Multiple Beacons using APRSIS32 Internet Only

Brian Wall All Messages By This Member #37459 I have noticed a local APRS station is beaconing the digipeater ID as well as the frequency for a repeater at the same site. (I know some of my TNC's have 3 beacon text available.) I have various repeaters which are not digipeater locations but I was wondering if I could use APRSIS32 to beacon the frequency and tower icon for multiple locations? 1. Would I have to run multiple instances of APRSIS32?? or is there a way to create multiple call signs or frequencies each with it's own lat/long, etc. in one instance of the app. 2. I see someone is beaconing/positioning 5 callsign/ssid's using APRSDroid so it appears it can be done over IP. Thanks for any insight. 73, Brian W1BKW
Brian Wall All Messages By This Member #37460 开云体育 Also Lynn, this maybe the same principle as you are doing with the GP-XXXXX tower icons you are posting. ?It would be the same idea but using frequencies instead of mt names. ?Is the GP beacons all from one instance of APRSIS32? toggle quoted message Show quoted text On Jan 17, 2024, at 10:58?PM, Brian Wall <W1BKW@...> wrote: ?I have noticed a local APRS station is beaconing the digipeater ID as well as the frequency for a repeater at the same site. (I know some of my TNC's have 3 beacon text available.) I have various repeaters which are not digipeater locations but I was wondering if I could use APRSIS32 to beacon the frequency and tower icon for multiple locations? 1. Would I have to run multiple instances of APRSIS32?? or is there a way to create multiple call signs or frequencies each with it's own lat/long, etc. in one instance of the app. 2. I see someone is beaconing/positioning 5 callsign/ssid's using APRSDroid so it appears it can be done over IP. Thanks for any insight. 73, Brian W1BKW
Adam - KC2ANT All Messages By This Member #37461 Good morning, This can be done with a single instance of APRSIS32. I have several from my home station, and several on a club station that I manage that go both over IP and RF.? Please look at the following Specifically the items and objects originated 73's Adam Mahnke KC2ANT toggle quoted message Show quoted text On Wed, Jan 17, 2024 at 11:03?PM Brian Wall <w1bkw@...> wrote: Also Lynn, this maybe the same principle as you are doing with the GP-XXXXX tower icons you are posting.? It would be the same idea but using frequencies instead of mt names.? Is the GP beacons all from one instance of APRSIS32? On Jan 17, 2024, at 10:58?PM, Brian Wall <W1BKW@...> wrote: ?I have noticed a local APRS station is beaconing the digipeater ID as well as the frequency for a repeater at the same site. (I know some of my TNC's have 3 beacon text available.) I have various repeaters which are not digipeater locations but I was wondering if I could use APRSIS32 to beacon the frequency and tower icon for multiple locations? 1. Would I have to run multiple instances of APRSIS32?? or is there a way to create multiple call signs or frequencies each with it's own lat/long, etc. in one instance of the app. 2. I see someone is beaconing/positioning 5 callsign/ssid's using APRSDroid so it appears it can be done over IP. Thanks for any insight. 73, Brian W1BKW
Brian Wall All Messages By This Member #37462 开云体育 Thank you Adam, I will take a look at those references and see what I find. ? 73, Brian W1BKW ? toggle quoted message Show quoted text From: [email protected] <[email protected]> On Behalf Of Adam Mahnke Sent: Thursday, January 18, 2024 07:19 To: [email protected] Subject: Re: [APRSISCE] Multiple Beacons using APRSIS32 Internet Only ? Good morning, ? This can be done with a single instance of APRSIS32. I have several from my home station, and several on a club station that I manage that go both over IP and RF.? ? Please look at the following ? Specifically the items and objects originated ? 73's Adam Mahnke KC2ANT ? On Wed, Jan 17, 2024 at 11:03?PM Brian Wall <w1bkw@...> wrote: ? Also Lynn, this maybe the same principle as you are doing with the GP-XXXXX tower icons you are posting.? It would be the same idea but using frequencies instead of mt names.? Is the GP beacons all from one instance of APRSIS32? On Jan 17, 2024, at 10:58?PM, Brian Wall <W1BKW@...> wrote: ?I have noticed a local APRS station is beaconing the digipeater ID as well as the frequency for a repeater at the same site. (I know some of my TNC's have 3 beacon text available.) I have various repeaters which are not digipeater locations but I was wondering if I could use APRSIS32 to beacon the frequency and tower icon for multiple locations? 1. Would I have to run multiple instances of APRSIS32?? or is there a way to create multiple call signs or frequencies each with it's own lat/long, etc. in one instance of the app. 2. I see someone is beaconing/positioning 5 callsign/ssid's using APRSDroid so it appears it can be done over IP. Thanks for any insight. 73, Brian W1BKW
Adam - KC2ANT All Messages By This Member #37463 No Problem. If you need further assistance feel free to reach out directly?or via this thread. 73's Adam Mahnke KC2ANT toggle quoted message Show quoted text On Thu, Jan 18, 2024 at 7:33?AM Brian Wall <w1bkw@...> wrote: Thank you Adam, I will take a look at those references and see what I find. ? 73, Brian W1BKW ? From: [email protected] <[email protected]> On Behalf Of Adam Mahnke Sent: Thursday, January 18, 2024 07:19 To: [email protected] Subject: Re: [APRSISCE] Multiple Beacons using APRSIS32 Internet Only ? Good morning, ? This can be done with a single instance of APRSIS32. I have several from my home station, and several on a club station that I manage that go both over IP and RF.? ? Please look at the following ? Specifically the items and objects originated ? 73's Adam Mahnke KC2ANT ? On Wed, Jan 17, 2024 at 11:03?PM Brian Wall <w1bkw@...> wrote: ? Also Lynn, this maybe the same principle as you are doing with the GP-XXXXX tower icons you are posting.? It would be the same idea but using frequencies instead of mt names.? Is the GP beacons all from one instance of APRSIS32? On Jan 17, 2024, at 10:58?PM, Brian Wall <W1BKW@...> wrote: ?I have noticed a local APRS station is beaconing the digipeater ID as well as the frequency for a repeater at the same site. (I know some of my TNC's have 3 beacon text available.) I have various repeaters which are not digipeater locations but I was wondering if I could use APRSIS32 to beacon the frequency and tower icon for multiple locations? 1. Would I have to run multiple instances of APRSIS32?? or is there a way to create multiple call signs or frequencies each with it's own lat/long, etc. in one instance of the app. 2. I see someone is beaconing/positioning 5 callsign/ssid's using APRSDroid so it appears it can be done over IP. Thanks for any insight. 73, Brian W1BKW
Lynn Deffenbaugh #37464 Yes, the GP-* objects are all coming from a single instance of APRSIS32.? ?I also transmit a repeater object, 146.850-P (https://aprs.fi/146.850-P), for our local club repeater.? You create these like any other object in APRSIS32, and the key is what you put in the Cmnt string. Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32 PS.? Sorry about the delayed response, but somehow these threaded messages didn't hit my inbox, except for Adam's final one.
Brad Ko6kL All Messages By This Member #37469 would be great if you could easily click on URL links that show up on the map ...even if restricted to pic's links and not full URL ( virus etc) ( thanks for all the great work Lynn )?

Previous Topic Next Topic