Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Kantronic TNC connection
|
Posting response to the main group. Yes, APRSIS32 can connect to any hardware TNC that can be put in KISS mode (most TNCs can). ?? Most common is the KPC-3 or KPC-3+ There are 2 ways of doing this: 1. EASIEST: Configuring the Kantronics TNC in KISS mode such that it stays there - even after a power cycle. ??? See the TNC manual for instructions, check the WIKI, or post back here for more help. ??? In APRSIS32 create a new port as a Simply(KISS) => instructions on the WIKi ?? ??? The KPC-3+ has some known issues (delays) as a DIGI, but works fine for all other operations. ??? Most other Kantronics TNCs have similar interfaces.? The TNC manual should give KISS instructions ??? Somewhere on the internet is a set of Windows compatible files that will change the TNC mode as well. 2. Option 2:? Configure theAPRSIS32 port as a Simply(KISS) port then? ???????????????????? modify the APRSIS32.xml file according to the above WIKI (lower section). I hope this helps! Robert Giuliano
On Thursday, November 21, 2024 at 11:14:15 AM EST, Ridgewood Macdonald <kb2hwl@...> wrote:
Thank you? Question can this program connect with kantronic TNC’s? Tnx Ridgewood Macdonald On Nov 21, 2024, at 8:14?AM, Rob Giuliano <kb8rco@...> wrote:
|
to navigate to use esc to dismiss