Keyboard Shortcuts
Likes
Search
SAFETY <<< WAS: RE: [7x12MiniLathe] Mounting PVC Fitting for Boring
开云体育Once again an e-mail string has fallen off its original subject and is wandering around aimlessly.? Can we please get back to the original subject of mounting a plastic elbow on a lathe or just stop if enough has been said? ? On the subject of safety, keep in mind that EVERYTHING we do, even breathing the air. carries some degree of risk. ?Machining equipment and the materials we use are inherently dangerous.? Our job is to understand and evaluate the risks, and to take appropriate actions to reduce the risks so that they will not cause us harm.? We do this by recognizing the risks and using APPROPRIATE Personal Protective Equipment (PPEs), procedures, and administrative controls to help keep us safe and off the Darwin Awards page.? ??? ? Jerry F. ?? ? From: [email protected] [mailto:[email protected]] On Behalf Of Pierre-Raymond Rondelle via groups.io
Sent: Sunday, October 27, 2024 10:57 AM To: [email protected] Subject: Re: [7x12MiniLathe] Mounting PVC Fitting for Boring ? So, for those who have no common sense and who are so scared : please don't use nor drink water, whose scientific names are also di-hydrogen monoxide and mono-oxygen di-hydride. |
开云体育No need to have a ventriloquist on this forum ! Common sense. Full stop On 28.10.24 07:06, Gerald Feldman via
groups.io wrote:
|
Lots of interesting ideas.? I'm particularly interested in working with heating the PVC for future projects.?? In this case, using the PVC coupling, once it was mounted and centered it literally took only 3-4 passes (on each side) with the boring tool in the lathe to zero in on the tapered fit I wanted.? The 90 degree fitting should progress in a similar manner once the mounting is solved.? Seems like that's the easiest solution. I like the idea of mounting the 90 to a block that I can put in my 4-jaw chuck - I have some aluminum blocks that I had originally planned to use as tool holders that should do nicely.
On Sunday, October 27, 2024 at 11:06:45 PM PDT, Gerald Feldman <gfeldman2904@...> wrote:
Once again an e-mail string has fallen off its original subject and is wandering around aimlessly.? Can we please get back to the original subject of mounting a plastic elbow on a lathe or just stop if enough has been said? ? On the subject of safety, keep in mind that EVERYTHING we do, even breathing the air. carries some degree of risk. ?Machining equipment and the materials we use are inherently dangerous.? Our job is to understand and evaluate the risks, and to take appropriate actions to reduce the risks so that they will not cause us harm.? We do this by recognizing the risks and using APPROPRIATE Personal Protective Equipment (PPEs), procedures, and administrative controls to help keep us safe and off the Darwin Awards page.? ??? ? Jerry F. ?? ? From: [email protected] [mailto:[email protected]] On Behalf Of Pierre-Raymond Rondelle via groups.io
Sent: Sunday, October 27, 2024 10:57 AM To: [email protected] Subject: Re: [7x12MiniLathe] Mounting PVC Fitting for Boring ? So, for those who have no common sense and who are so scared : please don't use nor drink water, whose scientific names are also di-hydrogen monoxide and mono-oxygen di-hydride. |
Messages
More