开云体育

  1. 7x12MiniLathe
  2. Topics

Here list of charts & Tables

 

?I found to be very useful with mini lathe is this list of charts & Tables
It keeps from having to get? Machinist Hand Book out. I first by going machinist Hand Book but found myself washing hands a lot so costly stay new.
?
I have in ?" binder like said before and keep never the mini lathe? in plastic protector to keep oil hands off the pages. ,
?
 

The file #8 is hardness testing I finally got down load and the unloaded.
Like Mohs hardness testing for material hunting just like pencil.? The other was magnic and tape now read to hunt materials for mini lathe?
?
The best part of a magnic is for stainless steel series 300 in non magnic easy to machine.?
If magnic then 400 and will work harden not fun in mini lathe?
?
Dave?
 

The Machinery's Handbook I bought included a pocket reference, perhaps to reduce wear & tear on the big everything-but-the-kitchen-sink book.
 

When purchased my copy they did not? have small book. The small book came years later.?
The three ring binder works better because only has what I need.?
?
Dave?
 

Here is one on Hardness tester
I like because leave no marks on new parts.
?
Shows how built
?
?
This Closeup of the scale .
?
 

The first thing tested was my lathe bedways .?
?
I forgot to say the reason for small ball so test thiner materials.?
?
But out looking for materials a large ball is harder to lose. It happens a lot.?
?
So in shop a use 3/16"
Looking for materials I have a bag of ? low quality cheap balls.?
?
Dave?
 

Add a few more pages on making?
  1. PISTON RINGS
  2. MILLING IN A LATHE?
  3. MAKING GEARS IN A LATHE?
  4. BORE A ENGINE CASTING ON A LATHE
  5. DRILLING A LONG BAR IN A LATHE?
  6. and more
?
Dave
?
Part 1 of 2
Part 2 of 2
?
?
see link for more
?
/g/minilathe/files/6.%20Rarely%20used%20Charts%20and%20tables/1%29%20How%20to%20books%20and%20files/1%20piston%20ring%20milling%20gear%20cutting%20and%20more.PDF

1 - 7 of 7