开云体育

Is there a way to bore (ream) the stock lathe chuck out so it will
pass larger stock? If not what are the recommendations for an after
market chuck. I would like to be able to pass at least 7/8" stock
thru.

Thanks for the help,

Tom V

The spindle bore is limiting - it's a bit under 13/16". It can be
reamed to 13/16" (see the "Al's reamer" file in the 7x10 group, for a
loaner reamer.)
The 4" 3 jaw chuck that Wholesale tool had on sale has a 22mm thru
hole. To use it, you'll need to buy/make an adapter plate.
www.wttool.com

Roy
--- In 7x12minilathe@..., "bt99ss <Thvin@a...>"
<Thvin@a...> wrote:

Is there a way to bore (ream) the stock lathe chuck out so it will
pass larger stock? If not what are the recommendations for an

after

market chuck. I would like to be able to pass at least 7/8" stock
thru.

Thanks for the help,

Tom V