开云体育

  1. 7x12MiniLathe
  2. Topics

AR Warner HSS Inserts

 

Has anyone had direct experience with AR Warner HSS inserts?
Dick
 

I have a couple. They work good on brass but I prefer carbide for steel or aluminum over the Warner ones as they're totally flat.?

Ryan
On Apr 11, 2024 at 9:29?AM -0400, OldToolmaker via groups.io <old_toolmaker@...>, wrote:

Has anyone had direct experience with AR Warner HSS inserts?
Dick

 

I'd agree with that experience.
I use the narrow ones (1/32 & 1/16") for grooving.? Much better than using a home made tool out of old hacksaw blades!

Dave
The Emerald Isle


On Thursday, 11 April 2024, 14:25:40 UTC, Ryan H via groups.io <ifly172@...> wrote:


I have a couple. They work good on brass but I prefer carbide for steel or aluminum over the Warner ones as they're totally flat.?

Ryan
On Apr 11, 2024 at 9:29?AM -0400, OldToolmaker via groups.io <old_toolmaker@...>, wrote:

Has anyone had direct experience with AR Warner HSS inserts?
Dick
 

开云体育

I've been using them for several years now on just about everything I turn & like them a lot . I'm still on my original inserts that came with the kit & haven't touched the spare that comes with the kit or all of the cutting edges on each insert . Their capable of taking a good size cut in aluminum . I have never really pushed them real hard in any steel . I use them on my South Bend lathe . If ya have a tool holder that takes I believe TPMT inserts ya can just buy the inserts , but all that in on their website .

animal

On 4/11/24 6:29 AM, OldToolmaker via groups.io wrote:

Has anyone had direct experience with AR Warner HSS inserts?
Dick

1 - 4 of 4