Locked ANSWER TO GUIDE RULE
|
The first that only want to see mini lathes only. I seen on some? groups it has to what title is only.
?
Second group?arsed or not wanting to make the effort
to add OT to help the first group.?
?
Now the owner and moderators are trying to keep group fun and interesting for all.
Then dealing with the first group and second group not helping.?
?
A owner and moderators have hard job at times. How mush? can you talk the subject.
Some think you only talk about a mini lathes and the drill chuck is off subject.??
So soon or later you will have to go little or more off for slow times?
?
Last year this had a long topic on bikes. It was a interesting topic to read I had nothing to say. The important part it made group interesting for slow time.
?
If look at a few OFF topic I have post here in Tilte I put OFF SUBJECT .?
?
I Like OT Simple hit two keys at beginning?
?
?
?
On Wed, Jan 22, 2025 at 04:55 PM, Tony Smith wrote:
|
|
This too
What is next thd chuck on the mini lathe is ot
?
On Thu, Jan 23, 2025 at 03:22 PM, Tony Smith wrote:
|
|
I guess if get to hot on the lathe,? mill or drill press it is off topic.?
After all what does a motor have to do with a mini lathe.?
?
FYI any motor hears can be a fire ?.? I have temperature gauge on my mini lathe. I posted here and call on topic.
?
Painting die ? could be a little dicey on or off subjects. But helps with wife on getting a mini lathe. Happy wife happy mini lathe.?
?
Dave?
?
?
On Fri, Jan 24, 2025 at 01:10 AM, Tony Smith wrote:
|
|
I forgot rotary table.
If rotary table goes a mill it is OT.
But if goes Mini lathe it is $&#^$
I guess it depends on if you interested read a about putting on a mini lathe if on topic or off.
?
If do not like what they wrote then? write moderators and say OFF TOPIC and ask to have it delete post so no has anything thing to read.??
?
The bottom for group to be interesting is have something to read about and better to comment on too.
?
In November of 2023 I finally purchased a mini after reading about mini lathes since 2005.
The resoan thinking a mini lathe in 2005 changed by time purchased.? I chose to write about here and gave everyone here some read and write about.?
?
No one goes out buys a lathe every month. My first was a garulatoin present it only down payment on a $10,000 today same lathe cost $80,000 had for over 30 years. My next had for 20 years. The point is most do not go out and buy new lathe very often. So hard for very here to say a lot? .?
So we all here need more than jest the mini lathes to talk about or this would a very slow group
?
Dave?
?
On Fri, Jan 24, 2025 at 01:10 AM, Tony Smith wrote:
|
davesmith1800