ER 32 collets for the 7x14

jumbo75007 #18294 I have a ER 32 collet chuck for my 7x14. Question, for the precision (or lack of) that this lathe can do, will it make any difference which ER 32 collets I buy? I have found collets from approximately $5.00 each on Ebay to $15 to $20+ each mail order. I generally believe that "you get what you pay for," but do I need to pay for something that might be "overkill" for this machine on precision manufacturing? (If that makes any sense) Thanks, Dan Fuller Carrollton, Texas
Steve Claggett #18303 I have the cheap er32 chuck and collet set. The few sizes I have used are under .0005 run out. I think I paid about $50 (e-bay) for chuck and eleven collets. It's not the machine or tooling that is lacking, it's my talents. . toggle quoted message Show quoted text --- In 7x12minilathe@..., "jumbo75007" <fullerdj@...> wrote: I have a ER 32 collet chuck for my 7x14. Question, for the precision (or lack of) that this lathe can do, will it make any difference which ER 32 collets I buy? I have found collets from approximately $5.00 each on Ebay to $15 to $20+ each mail order. I generally believe that "you get what you pay for," but do I need to pay for something that might be "overkill" for this machine on precision manufacturing? (If that makes any sense) Thanks, Dan Fuller Carrollton, Texas

开云体育