¿ªÔÆÌåÓý

  1. 7x12MiniLathe
  2. Topics

New Lead Screw Bearings And Installing A Mystery Rod

 

I just kinda tripped over this earlier tonite? figured there may be some
vids here that some of ya folks may be interested in .

this is the one I watched , but the guy/gal has lots of good vids
 

Is it just me?
I'm not seeing any kind of link. Youtube or something?



Sent from ProtonMail, Swiss-based encrypted email.

Sent with Proton Mail secure email.

On Monday, April 21st, 2025 at 11:45 PM, mike allen via groups.io <animal@...> wrote:

I just kinda tripped over this earlier tonite figured there may be some
vids here that some of ya folks may be interested in .

this is the one I watched , but the guy/gal has lots of good vids
 

It's not you , it's me . that means that I sent a machining link to
a bunch of buds instead of the music link I thought I was sending .

try this



For some unknown reason I have been unable to post comments on youtube
now for a couple of years & I also no longer have the button to hit to
send the video to my TV .

sorry bout the link

animal

On 4/21/25 11:49 PM, Phil via groups.io wrote:
Is it just me?
I'm not seeing any kind of link. Youtube or something?



Sent from ProtonMail, Swiss-based encrypted email.

Sent with Proton Mail secure email.

On Monday, April 21st, 2025 at 11:45 PM, mike allen via groups.io <animal@...> wrote:

I just kinda tripped over this earlier tonite figured there may be some
vids here that some of ya folks may be interested in .

this is the one I watched , but the guy/gal has lots of good vids
 

OK, that works. Yes, I Have seen this. That guy does some fabulous stuff. I have been subscribed for quite a while.
Thanks.



Sent from ProtonMail, Swiss-based encrypted email.

Sent with Proton Mail secure email.

On Monday, April 21st, 2025 at 11:54 PM, mike allen via groups.io <animal@...> wrote:

It's not you , it's me . that means that I sent a machining link to
a bunch of buds instead of the music link I thought I was sending .

try this



For some unknown reason I have been unable to post comments on youtube
now for a couple of years & I also no longer have the button to hit to
send the video to my TV .

sorry bout the link

animal

On 4/21/25 11:49 PM, Phil via groups.io wrote:

Is it just me?
I'm not seeing any kind of link. Youtube or something?

Sent from ProtonMail, Swiss-based encrypted email.

Sent with Proton Mail secure email.

On Monday, April 21st, 2025 at 11:45 PM, mike allen via groups.io animal@... wrote:

I just kinda tripped over this earlier tonite figured there may be some
vids here that some of ya folks may be interested in .

this is the one I watched , but the guy/gal has lots of good vids
 

I dunno what's up with that hex rod but I did something similar to address backlash in the lead screw.? I didn't use angular contact bearings, I used thrust bearings.? I did it by machining a replacement bearing? block, which has the same outside dimensions as the OEM version.? I saw no point in using steel so it's 6061 aluminum.
?
The job was done to improve the performance of my LS hand crank mod.? My LS is 16TPI so the Z motion is a little coarse compared to the cross slide and compound feed screws @20TPI.? I also added a DRO on the Z axis so it can function as a long-throw compound.....for some things.? I still need the top slide for threading so it's not going in the scrap bin.? But for a lot of stuff I can use the plinth, which is good in terms of improved rigidity.
?
Mark

1 - 5 of 5